FUJI错误代码查询.pdf - 第2267页

Used by: Cause: An error occurred in reading of the ccserv.ini. Remedy: Report the details of this problem to Fuji. ------------------------------ Code: 52??0121 Display: The linedesc.cfg failure. Used by: Cause: An erro…

100%1 / 5282
------------------------------
Code: 52??0105
Display: Failed to invoke the C/C wakeup program.
Used by:
Cause: As above.
Remedy:
------------------------------
Code: 52??0106
Display: The C/C is transferring.
Used by:
Cause: Cannot restart the C/C because as above.
Remedy: Wait a minute and then try restarting the C/C.
------------------------------
Code: 52??0110
Display: The C/C is transferring.
Used by:
Cause: Unable to confirm CC license.
Remedy: Please check the license.
------------------------------
Code: 52??0111
Display: CCSERV or CCDATA environment variable is not set.
Used by:
Cause: As above.
Remedy:
------------------------------
Code: 52??0112
Display: The directory structure for the C/C is incorrect.
Used by:
Cause: As above.
Remedy:
------------------------------
Code: 52??0113
Display: Conflict the directory of CCDATA.
Used by:
Cause: The data directory specified CCDATA has been used by the C/C on another machine.
Remedy: Change the CCDATA value, or shutdown the C/C on the another machine.
------------------------------
Code: 52??0114
Display: Failed to create the shared memory area.
Used by:
Cause: As above.
Remedy:
------------------------------
Code: 52??0115
Display: Failed to get the shared memory of the C/C.
Used by:
Cause: As above.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 52??0120
Display: The ccserv.ini failure.
第 2266 页
Used by:
Cause: An error occurred in reading of the ccserv.ini.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 52??0121
Display: The linedesc.cfg failure.
Used by:
Cause: An error occurred while either adding or editing HELPS settings, or reading line configuration
data. Restart processing has been aborted.
Remedy: When adding or editing HELPS settings restart the CC. Confirm the line configuration is correct.
------------------------------
Code: 52??0122
Display: Failed to open the linedesc.cfg.
Used by:
Cause: Cannot open the linedescription file.
Remedy: Check the location of the line descriptopn file and its access rights.
------------------------------
Code: 52??0123
Display: Format error in the linedesc.cfg.
Used by:
Cause: There is a format error in the line description file.
Remedy: Check the setting in the line descriptopn file.
------------------------------
Code: 52??0124
Display: There is not supported machines.
Used by:
Cause: Some specified machine types in the line description file are not supported.
Remedy: Check the setting for "MCTYPE" in the line description file.
------------------------------
Code: 52??0125
Display: There is not installed machines.
Used by:
Cause: Some specified machine types in the line description file are not installed.
Remedy: Check the setting for "MCTYPE" in the line description file.
------------------------------
Code: 52??0126
Display: The ccenv failure.
Used by:
Cause: An error occurred in reading of the ccenv file.
Remedy: Check the ccenv file settings.
------------------------------
Code: 52??0127
Display: Failed to open the ccenv file.
Used by:
Cause: Cannot open the ccenv file.
Remedy: Check the location of the ccnev file and its access rights.
------------------------------
Code: 52??0128
Display: Format error in the ccenv.
Used by:
Cause: There is a format error in the ccenv file.
第 2267 页
Remedy: Check the setting in the ccenv file.
------------------------------
Code: 52??0201
Display: The C/C (basic set) and the transmitter versions are not compatible.
Used by:
Cause: The specified command cannot be executed as the C/C (basic set) and the transmitter versions
are not compatible.
Remedy: Use the same C/C and transmitter versions, or use versions that are compatible.
------------------------------
Code: 52??0211
Display: The C/C (basic set) and the transmitter versions are not compatible.
Used by:
Cause: The specified command cannot be executed as the C/C (basic set) and the transmitter versions
are not compatible.
Remedy: Use the same C/C and transmitter versions, or use versions that are compatible.
------------------------------
Code: 52??1000
Display: No "UNIT", "PROGRAM" or "UNIT", "PROGRAM" is not at the correct position.
Used by:
Cause: "UNIT", "PROGRAM" was not found in the specified production program or "UNIT", "PROGRAM"
does not follow the correct unit.
Remedy: Check the production program "UNIT", "PROGRAM" settings. Furthermore, check the setting for
the "UNIT" line prior to "UNIT", "PROGRAM".
------------------------------
Code: 52??1001
Display: No "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: "BLOCK", "HEADER-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production
program.
------------------------------
Code: 52??1002
Display: No "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-".
Used by:
Cause: "BLOCK", "PGHEAD-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 52??1003
Display: No "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+".
Used by:
Cause: "BLOCK", "SEQUENCE+" was not found in "UNIT", "PROGRAM" in the specified production
program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 52??1004
Display: No "UNIT", "PROGRAM" - "BLOCK", "DEVICE+".
Used by:
Cause: "BLOCK", "DEVICE+" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
第 2268 页