FUJI错误代码查询.pdf - 第2292页

Display: Referenced G mark data file not there. Used by: Cause: The G mark data file which is referred in the specified production program was not found. This report is made when the mark data and production program are …

100%1 / 5282
Display: Setting for B mark file name is too long.
Used by:
Cause: The B mark file setting which is entered at "GMKBN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKBN" setting in the production program.
------------------------------
Code: 52??1254
Display: Setting for M mark file name is too long.
Used by:
Cause: The M mark file setting which is entered at "GMKMN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKMN" setting in the production program.
------------------------------
Code: 52??1255
Display: Setting for G mark file name is too long.
Used by:
Cause: The G mark file setting which is entered at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK",
"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum
length when downloaded.
Remedy: Check the "GMKGN" setting in the production program.
------------------------------
Code: 52??1300
Display: Referenced F mark data file not there.
Used by:
Cause: The F mark data file which is referred to in the specified production program was not found. This
report is made when the mark data and production program are in different files, the F mark data is
required in the applicable machine type and the above error is detected.
Remedy: Check the setting for "GMKFN" in "BLOCK", "PGHEAD-" in the specified production program.
Also check whether the file is in the mark data directory.
------------------------------
Code: 52??1301
Display: Referenced B mark data file not there.
Used by:
Cause: The B mark data file which is referred to in the specified production program was not found. This
report is made when the mark data and production program are in different files, the B mark data is
required in the applicable machine type and the above error is detected.
Remedy: Check the setting for "GMKBN" in "BLOCK", "PGHEAD-" in the specified production program.
Also check whether the file is in the mark data directory.
------------------------------
Code: 52??1302
Display: Referenced M mark data file not there.
Used by:
Cause: The M mark data file which is referred to in the specified production program was not found.
This report is made when the mark data and production program are in different files, the M mark data is
required in the applicable machine type and the above error is detected.
Remedy: Check the setting for "GMKMN" in "BLOCK", "PGHEAD-" in the specified production program.
Also check whether the file is in the mark data directory.
------------------------------
Code: 52??1303
第 2291 页
Display: Referenced G mark data file not there.
Used by:
Cause: The G mark data file which is referred in the specified production program was not found. This
report is made when the mark data and production program are in different files, the G mark data is
required in the applicable machine type and the above error is detected.
Remedy: Check the setting for "GMKGN" in "BLOCK", "PGHEAD-" in the specified production program.
Also check whether the file is in the mark data directory.
------------------------------
Code: 52??1304
Display: Referenced F mark data file in use.
Used by:
Cause: The F mark data file referred to in the specified production program is being used. This report is
made when the mark data and production program are in different files, the F mark data is required in the
applicable machine type and the above error is detected.
Remedy: Wait until the file is not being used and then re-execute.
------------------------------
Code: 52??1305
Display: Referenced B mark data file in use.
Used by:
Cause: The B mark data file referred to in the specified production program is being used. This report is
made when the mark data and production program are in different files, the B mark data is required in
the applicable machine type and the above error is detected.
Remedy: Wait until the file is not being used and then re-execute.
------------------------------
Code: 52??1306
Display: Referenced M mark data file in use.
Used by:
Cause: The M mark data file referred to in the specified production program is being used. This report is
made when the mark data and production program are in different files, the M mark data is required in
the applicable machine type and the above error is detected.
Remedy: Wait until the file is not being used and then re-execute.
------------------------------
Code: 52??1307
Display: Referenced G mark data file in use.
Used by:
Cause: The G mark data file referred to in the specified production program is being used. This report is
made when the mark data and production program are in different files, the G mark data is required in
the applicable machine type and the above error is detected.
Remedy: Wait until the file is not being used and then re-execute.
------------------------------
Code: 52??1308
Display: No authority for referenced F mark data file.
Used by:
Cause: There is no access authority for the F mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the F mark data is required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1309
Display: No authority for referenced B mark data file.
Used by:
第 2292 页
Cause: There is no access authority for the B mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the B mark data is required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1310
Display: No authority for referenced M mark data file.
Used by:
Cause: There is no access authority for the M mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the M mark data is required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1311
Display: No authority for referenced G mark data file.
Used by:
Cause: There is no access authority for the G mark data file which is referred to in the specified
production program. This report is made when the mark data and production program are in different
files, the G mark data is required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1312
Display: Referenced F mark data file could not be opened.
Used by:
Cause: The F mark data file referred to in the specified production program could not be opened. This
report is made when the mark data and production program are in different files, the F mark data is
required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1313
Display: Referenced B mark data file could not be opened.
Used by:
Cause: The B mark data file referred to in the specified production program could not be opened. This
report is made when the mark data and production program are in different files, the B mark data is
required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1314
Display: Referenced M mark data file could not be opened.
Used by:
Cause: The M mark data file referred to in the specified production program could not be opened. This
report is made when the mark data and production program are in different files, the M mark data is
required in the applicable machine type and the above error is detected.
Remedy:
------------------------------
Code: 52??1315
Display: Referenced G mark data file could not be opened.
Used by:
Cause: The G mark data file referred to in the production program could not be opened. This report is
made when the mark data and production program are in different files, the G mark data is required in
the applicable machine type and the above error is detected.
第 2293 页