FUJI错误代码查询.pdf - 第777页

Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "Deviation Count Overflow(X)" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: X-axis deviation overflow. (value…

100%1 / 5282
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The X-axis has overtraveled in the (-) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Use inching to cancel the overtravel.
------------------------------
Code: 12076?03
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis(+) Overtravel" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The X-axis has overtraveled in the (+) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Use inching to cancel the overtravel.
------------------------------
Code: 12076?04
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis Servo Amp Error" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: X-axis servo driver error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, whether the axis action has become
extremely heavy, or whether an error has occurred in the servo amp.
------------------------------
Code: 12076?05
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis PG Disconnection Err" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: X-axis PG disconnection error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the connector has become disconnected from the servo axis, or whether an error
has occurred in the servo amp.
------------------------------
Code: 12076?0B
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis Positioning Time Out" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: X-axis positioning timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, whether the axis action has become
extremely heavy, or whether an error has occurred in the servo amp.
------------------------------
Code: 12076?0C
第 776 页
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Deviation Count Overflow(X)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: X-axis deviation overflow.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, whether the axis action has become
extremely heavy, or whether an error has occurred in the servo amp.
------------------------------
Code: 12076?0D
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis (-) Software Limit" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The axis movement target value has exceeded the software limit in the (-) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the program coordinates and the Proper data values.
------------------------------
Code: 12076?0E
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"X-axis (+) Software Limit" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The axis movement target value has exceeded the software limit in the (+) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the program coordinates and the Proper data values.
------------------------------
Code: 12076?10
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overcurrent/PWT Overheat" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Either excessive current or overheating of the power transistor has been detected in the X-axis
servo pack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 12076?11
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Short Circuit" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A short circuit has been detected in the X-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether one of the motor power wires (U, V, or W) is shorted to the ground (E).
------------------------------
第 777 页
Code: 12076?20
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Software Limit (+)" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The X-axis servopack software limit has been exceeded in the (+) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: The movement target position exceeds the limit values specified in the Proper data. Check the
movement target value and the Proper data values.
------------------------------
Code: 12076?21
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Software Limit (-)" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The X-axis servopack software limit has been exceeded in the (-) direction.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: The movement target position exceeds the limit values specified in the Proper data. Check the
movement target value and the Proper data values.
------------------------------
Code: 12076?22
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Positioning Time-out" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: X-axis servopack positioning timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy.
------------------------------
Code: 12076?23
Display: "ICM (PMC?,SCU?) Error Code:********" (QP2)
"Power to the servo amp has been cut" (QP2)
Used by: QP202,QP203,QP242
Cause: The power to the servo amp has been cut. ? is the module number. "****" is the error code.
Remedy: Check around the power source for problems such as loose terminal blocks etc.
------------------------------
Code: 12076?30
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Regenerative Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Regenerative error in the X-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 12076?31
第 778 页