FUJI错误代码查询.pdf - 第33页

so that it is within the range established in part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. ------------------------------ Code: 11011320 Display: Used …

6/6M/65/642). The applicable part data is that listed in lines 105-117 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011099

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 118-130 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 1101109A

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 131-140 in "D_data".The applicable part

data is that listed in lines 131-143 in "D_data"(CP43).

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 1101109B

Display:

Used by: CP4-3

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size". The applicable part data is that listed in

lines 144-156 in "D_data".

Remedy: Change the value for one of the program items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size"

so that it is within the range established in part data items,"Nozzle_size_min" and "Nozzle_size_max".

Alternatively, change the part data.

------------------------------

Code: 1101109C

Display:

Used by: CP4-3

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size". The applicable part data is that listed in

lines 157-160 in "D_data".

Remedy: Change the value for one of the program items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size"

第 32 页

so that it is within the range established in part data items,"Nozzle_size_min" and "Nozzle_size_max".

Alternatively, change the part data.

------------------------------

Code: 11011320

Display:

Used by:

Cause: Part data's nozzle number is not 1 or 2 on a CP.

Remedy: Check Part data.

------------------------------

Code: 11011321

Display:

Used by: CP3

Cause: There is a part higher than 4.5 mm encountered during a sequence (CP).

Remedy: Parts higher than 4.5 mm should be placed at the end of the placing sequences. Refer to Part

data for part heights.

------------------------------

Code: 11011322

Display:

Used by: CP3,CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: There are over 255 mark sequences (Fiducial mark, block skip marks) (CP).

Remedy: Reduce the number of mark sequences.

------------------------------

Code: 11011323

Display:

Used by: CP3,CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: There are mark read sequences for a machine which cannot read marks (CP). Alternately, a

production program with mark read sequences was transmitted but the Proper data has been deleted.

Remedy: Eliminate the mark read sequences if the machine does not read mark read sequences.

Otherwise, re-transmit Proper and Status data to the machine, and then transmit the production

program.

------------------------------

Code: 11011324

Display:

Used by: CP3,CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: There are over 11 next devices set (CP3). There are over 31 next devices set(CP4,CP43, CP-

6/6M/65/642/652C). A next device loop does not exist (the machine never returns to the original device).

Remedy: Reduce the number of next devices. Check the next device settings (make sure a loop is formed).

------------------------------

Code: 11011325

Display:

Used by: CP4-1,CP4-2,CP4-3

Cause: In the production program the nozzle diameter is not set correctly (CP4).

Remedy: Set the nozzle diameter in the production program.

------------------------------

Code: 11011326

Display: same as code.

Used by: CP643

Cause: The item "Multiple PCB Set" in the production program indicates double

board production,but the sequence data contains no sequence for the second board.

Remedy: Set the item "Multiple PCB Set" to 1,or enter sequence for the second board.

------------------------------

第 33 页

Code: 11011327

Display: Non

Used by: CP642,CP642M,CP643

Cause: The No.1 nozzle in the nozzle assignment table is less than 0.7 mm in size.

Remedy: Use nozzle of less than 0.7 mm at a position other than No.1.

------------------------------

Code: 11011400

Display:

Used by: GL2,GL541

Cause: The application time (G) is out of range.

Remedy: Check the program.

------------------------------

Code: 11011401

Display:

Used by:

Cause: The application speed (U) is out of range.

Remedy: Check the program.

------------------------------

Code: 11011402

Display:

Used by:

Cause: The feeder specification (F) is not set at 1 or 2.

Remedy: Check the program.

------------------------------

Code: 11011403

Display:

Used by:

Cause: The feeder specification (F) change over on even numbered devices.

Remedy: Check the program.

------------------------------

Code: 11011404

Display:

Used by:

Cause: The DX offset is out of range.

Remedy: Check the program.

------------------------------

Code: 11011405

Display:

Used by:

Cause: The DY offset is out of range.

Remedy: Check the program.

------------------------------

Code: 11011406

Display:

Used by:

Cause: The DQ offset is out of range.

Remedy: Check the program.

------------------------------

Code: 11011600

Display:

Used by: IP2

第 34 页