FUJI错误代码查询.pdf - 第602页

Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify that the device offset settings are correctly specified in Part data and Proper data. ----------------------------…

100%1 / 5282
Remedy: If this error occurs frequently, there may be a parts height sensor failure.
------------------------------
Code: 1206101F
Display: Feeder feed retract limit error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: Feeder feed retract limit error.
Remedy: Check to see if the feeder feed lever is at the retract limit position. If not, perform an I/O check
to retract the feed lever. If the retract limit sensor fails to switch on even though the feed lever is
retracted, adjust the sensor and dog positions. If the error persists even after the adjustments, there may
be a sensor wiring problem or a sensor failure.
------------------------------
Code: 12061020
Display: The X-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The X-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the X-axis coordinates are correct in the production program.
------------------------------
Code: 12061021
Display: The X-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The X-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the X-axis coordinates are correct in the production program.
------------------------------
Code: 12061022
Display: The Y-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Y-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the Y-axis coordinates are correct in the production program.
------------------------------
Code: 12061023
Display: The Y-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Y-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the Y-axis coordinates are correct in the production program.
------------------------------
Code: 12061024
Display: The Z-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Z-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the parts height is set correctly in Part data.
------------------------------
Code: 12061025
Display: The Z-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Z-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the parts height is set correctly in Part data.
------------------------------
Code: 12061026
Display: The D1-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D1-axis target position exceeds the plus-limit of the travel range specified in Proper data.
第 601 页
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 12061027
Display: The D1-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D1-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in part data and Proper data.
------------------------------
Code: 12061028
Display: The D2-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D2-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 12061029
Display: The D2-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D2-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 1206102A
Display: The NZ-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The NZ-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that a suitable pickup height offset is specified in Part data.
------------------------------
Code: 1206102B
Display: The NZ-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The NZ-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that a suitable pickup height offset is specified in Part data.
------------------------------
Code: 1206102C
Display: Head A detection error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: Head A detection error.
Remedy: Check to see if the Head A sensor is operating properly.
------------------------------
Code: 1206102D
Display: Head A detection sensor error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Head A detection sensor is not operating properly.
Remedy: Check the sensor wiring. If the wiring is OK, replace the sensor.
------------------------------
Code: 1206102E
Display: Feeder ID reading error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
第 602 页
Cause: Reading of the feeder ID failed.
Remedy: Check the ID of the feeder in the slot where the error occurred. Also, verify that the feeder ID
reader is connected properly.
------------------------------
Code: 1206102F
Display: Feeder type error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The wrong feeder is in the slot specified by the production program.
Remedy: Set the correct feeder in the slot where the error occurred.
------------------------------
Code: 12061030
Display: Feeder ID setting transmission error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: An error occurred in the feeder ID reader's setting data transmission.
Remedy: Check to see if the feeder ID reader is connected properly.
------------------------------
Code: 12061031
Display: Cam axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: Cam axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
------------------------------
Code: 12061032
Display: X-axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: X-axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
------------------------------
Code: 12061033
Display: Y-axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: Y-axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
------------------------------
Code: 12061034
Display: Z-axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: Z-axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
------------------------------
Code: 12061035
Display: PQ-axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: PQ-axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
------------------------------
Code: 12061036
Display: FQ-axis START processing error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: FQ-axis START processing error.
Remedy: If this error occurs frequently, use the machine's trace function to obtain trace data.
第 603 页