FUJI错误代码查询.pdf - 第1858页

Cause: One of the following errors exists in the specified PTN file (GSP5 pattern file). The specified PTN file does not exist or the specified file name is the directory name. Remedy: Check the PTN file. Specify the cor…

100%1 / 5282
Remedy: Connect before transmission.
------------------------------
Code: 21001B00
Display: Input file not found
Used by:
Cause: The input file does not exist.
Remedy: Check the input file name.
------------------------------
Code: 21001B01
Display: Illegal device
Used by:
Cause: An "A1" input device was specified
Remedy: Check the input device.
------------------------------
Code: 21001B02
Display: Output file already exist
Used by:
Cause: An output file of the same name exists.
Remedy: Either change the name of the output file or select overwrite.
------------------------------
Code: 21001B03
Display: Output file open error
Used by:
Cause: The output file cannot be opened. 1) An output file name is specified when multiple input files
have been selected. 2) The output file is write protected.
Remedy: 1) Check the output file name. 2) Either change the output file name or clear the write protect.
------------------------------
Code: 21001B04
Display: No entry Machine type
Used by:
Cause: The machine type was not specified.
Remedy: Specify the machine type.
------------------------------
Code: 21001B05
Display: Device not ready
Used by:
Cause: The device is not ready for operation.
Remedy: Check the output device.
------------------------------
Code: 21001C00
Display: Program file open error
Used by:
Cause: One of the following errors exists in the specified production program. The specified production
program does not exist or the specified file name is the directory name or write protect has been set for the
specified file.
Remedy: Check the production program name, specify the correct file name, and try operation again. If
the production program is write protected, re-execute the command after releasing the write protect.
------------------------------
Code: 21001C01
Display: PTN file open error
Used by:
第 1857 页
Cause: One of the following errors exists in the specified PTN file (GSP5 pattern file). The specified PTN
file does not exist or the specified file name is the directory name.
Remedy: Check the PTN file. Specify the correct file name, and resume operation.
------------------------------
Code: 21001C02
Display: Program file not found
Used by:
Cause: The specified production program name is not the name of the production program file.
Remedy: Check the production program name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C03
Display: PTN file not found
Used by:
Cause: The specified PTN file (GSP5 pattern file) is not the name of the PTN file.
Remedy: Check the PTN file name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C04
Display: Machine type mismatch
Used by:
Cause: The machine type for the production program and the PTN file (GSP5 pattern file) are not the
same. It is necessary for the machine type in the production program in use at the time of PTN conversion
and the machine type in the PTN file to be the same.
Remedy: Check the production program and PTN file. Choose the same machine type and resume
operation.
------------------------------
Code: 21001C05
Display: File read error
Used by:
Cause: A file read error occurred during the conversion process. It is possible that the specified
production program or the PTN file has been corrupted. It is also possible that the disk itself is damaged.
Remedy: Check the specified production program and PTN file (GSP5 pattern file) by using the MCS2
editor. Use the DCHECK command in the status display (accessed by simultaneously pressing the control
button and "G" at the UCI screen) to check if there is any problem with the hard disk or floppy disk.
------------------------------
Code: 21001C06
Display: File descriptor not found (Program)
Used by:
Cause: There is no file descriptor for the specified production program or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21001C07
Display: File descripter not found (PTN)
Used by:
Cause: There is no file descriptor for the specified PTN file (GSP5 pattern file) or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21002000
Display: Illigal parameter
Used by:
Cause: The start-up format is incorrect.
Remedy: Check the version numbers on the system and the GD editor. If they are not compatible, install
第 1858 页
compatible versions.
------------------------------
Code: 21002001
Display: in_out path change error
Used by:
Cause: Unable to change the input path.
Remedy: Re-boot the system.
------------------------------
Code: 21002002
Display: Message file set error
Used by:
Cause: Unable to set the message file.
Remedy: Re-boot the system. If the problem recurs re-install the system.
------------------------------
Code: 21002003
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot the system.
------------------------------
Code: 21002004
Display: PD file open error
Used by:
Cause: Unable to open the Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002005
Display: PD file header read error
Used by:
Cause: Unable to read the Part data header.
Remedy: If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002006
Display: No support parts type
Used by:
Cause: The part type is unsupported.
Remedy: Check the Part data computer vision number.
------------------------------
Code: 21002007
Display: PD file not found
Used by:
Cause: There is no Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002008
Display: Parts vision data read error
Used by:
Cause: There was a vision data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002009
第 1859 页