FUJI错误代码查询.pdf - 第1548页
Display: 1D234003 Used by: Cause: Coarse location of the part was not successful. Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any foreign objects which may be present. -…
Display:
Used by:
Cause: The length of the X axis is too short.
Remedy: Check the X length of the part.
------------------------------
Code: 1D230007
Display: 1D230007(CP2,3)
Used by:
Cause: The length in the y direction is too long. The length is more than 50% longer than the input
value.
Remedy: Check the length of the part.
------------------------------
Code: 1D230008
Display: 1D230008(CP2,3)
Used by:
Cause: The length in the y direction is too short. The length is more than 50% shorter than the input
value.
Remedy: Check the length of the part.
------------------------------
Code: 1D230010
Display: 1D230010(CP2,3)
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D230018
Display: 1D230018(CP2,3)
Used by:
Cause: The lead width is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D230019
Display: 1D230019(CP2,3)
Used by:
Cause: The lead width is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D234001
Display: 1D234001
Used by:
Cause: This is a part data error.
Remedy: Check that the part data is correct.
------------------------------
Code: 1D234002
Display: 1D234002
Used by:
Cause: There are no parts.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D234003
第 1547 页
Display: 1D234003
Used by:
Cause: Coarse location of the part was not successful.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D234004
Display: 1D234004
Used by:
Cause: The leads cannot be found.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D234005
Display: 1D234005
Used by:
Cause: The x dimension of the part is more than 20% longer than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D234006
Display: 1D234006
Used by:
Cause: The x dimension of the part is too long.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D234007
Display: 1D234007(CP2,3)
Used by:
Cause: The length in the y direction is too long. The length is more than 50% longer than the input
value.
Remedy: Check the length of the part.
------------------------------
Code: 1D234008
Display: 1D234008(CP2,3)
Used by:
Cause: The length in the y direction is too short. The length is more than 50% shorter than the input
value.
Remedy: Check the length of the part.
------------------------------
Code: 1D234010
Display: 1D234010(CP2,3)
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D234018
Display: 1D234018(CP2,3)
Used by:
Cause: The lead width is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
第 1548 页
Code: 1D234019
Display: 1D234019(CP2,3)
Used by:
Cause: The lead width is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D238002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D238100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D238110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D238111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D238112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D238113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D238114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D238115
第 1549 页