FUJI错误代码查询.pdf - 第2216页

Remedy: Check the "GMKGN" setting in the production program. ------------------------------ Code: 51??1300 Display: Referenced F mark data file not there. Used by: Cause: The F mark data file which is referred …

Cause: At the "GMKBN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production

program, the B mark file name setting is "" or it has been omitted. When downloading, the B mark data is

set to its default values.

Remedy: Check the "GMKBN" setting in the production program.

------------------------------

Code: 51??1250

Display: Setting omitted for M mark file name.

Used by:

Cause: At the "GMKMN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production

program, the M mark file name setting is "" or it has been omitted. When downloading, the M mark data

is set to its default values.

Remedy: Check the "GMKMN" setting in the production program.

------------------------------

Code: 51??1251

Display: Setting omitted for G mark file name.

Used by:

Cause: At the "GMKGN" line in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD" in the specified production

program, the G mark file name setting is "" or it has been omitted. When downloading, the G mark data is

set to its default values.

Remedy: Check the "GMKGN" setting in the production program.

------------------------------

Code: 51??1252

Display: Setting for F mark file name is too long.

Used by:

Cause: The F mark file setting which is entered at "GMKFN" in "UNIT", "PROGRAM" - "BLOCK",

"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum

length when downloaded.

Remedy: Check the "GMKFN" setting in the production program.

------------------------------

Code: 51??1253

Display: Setting for B mark file name is too long.

Used by:

Cause: The B mark file setting which is entered at "GMKBN" in "UNIT", "PROGRAM" - "BLOCK",

"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum

length when downloaded.

Remedy: Check the "GMKBN" setting in the production program.

------------------------------

Code: 51??1254

Display: Setting for M mark file name is too long.

Used by:

Cause: The M mark file setting which is entered at "GMKMN" in "UNIT", "PROGRAM" - "BLOCK",

"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum

length when downloaded.

Remedy: Check the "GMKMN" setting in the production program.

------------------------------

Code: 51??1255

Display: Setting for G mark file name is too long.

Used by:

Cause: The G mark file setting which is entered at "GMKGN" in "UNIT", "PROGRAM" - "BLOCK",

"PGHEAD" in the specified production program is too long. The file name is abbreviated to its maximum

length when downloaded.

第 2215 页

Remedy: Check the "GMKGN" setting in the production program.

------------------------------

Code: 51??1300

Display: Referenced F mark data file not there.

Used by:

Cause: The F mark data file which is referred to in the specified production program was not found. This

report is made when the mark data and production program are in different files, the F mark data is

required in the applicable machine type and the above error is detected.

Remedy: Check the setting for "GMKFN" in "BLOCK", "PGHEAD-" in the specified production program.

Also check whether the file is in the mark data directory.

------------------------------

Code: 51??1301

Display: Referenced B mark data file not there.

Used by:

Cause: The B mark data file which is referred to in the specified production program was not found. This

report is made when the mark data and production program are in different files, the B mark data is

required in the applicable machine type and the above error is detected.

Remedy: Check the setting for "GMKBN" in "BLOCK", "PGHEAD-" in the specified production program.

Also check whether the file is in the mark data directory.

------------------------------

Code: 51??1302

Display: Referenced M mark data file not there.

Used by:

Cause: The M mark data file which is referred to in the specified production program was not found.

This report is made when the mark data and production program are in different files, the M mark data is

required in the applicable machine type and the above error is detected.

Remedy: Check the setting for "GMKMN" in "BLOCK", "PGHEAD-" in the specified production program.

Also check whether the file is in the mark data directory.

------------------------------

Code: 51??1303

Display: Referenced G mark data file not there.

Used by:

Cause: The G mark data file which is referred in the specified production program was not found. This

report is made when the mark data and production program are in different files, the G mark data is

required in the applicable machine type and the above error is detected.

Remedy: Check the setting for "GMKGN" in "BLOCK", "PGHEAD-" in the specified production program.

Also check whether the file is in the mark data directory.

------------------------------

Code: 51??1304

Display: Referenced F mark data file in use.

Used by:

Cause: The F mark data file referred to in the specified production program is being used. This report is

made when the mark data and production program are in different files, the F mark data is required in the

applicable machine type and the above error is detected.

Remedy: Wait until the file is not being used and then re-execute.

------------------------------

Code: 51??1305

Display: Referenced B mark data file in use.

Used by:

Cause: The B mark data file referred to in the specified production program is being used. This report is

made when the mark data and production program are in different files, the B mark data is required in

第 2216 页

the applicable machine type and the above error is detected.

Remedy: Wait until the file is not being used and then re-execute.

------------------------------

Code: 51??1306

Display: Referenced M mark data file in use.

Used by:

Cause: The M mark data file referred to in the specified production program is being used. This report is

made when the mark data and production program are in different files, the M mark data is required in

the applicable machine type and the above error is detected.

Remedy: Wait until the file is not being used and then re-execute.

------------------------------

Code: 51??1307

Display: Referenced G mark data file in use.

Used by:

Cause: The G mark data file referred to in the specified production program is being used. This report is

made when the mark data and production program are in different files, the G mark data is required in

the applicable machine type and the above error is detected.

Remedy: Wait until the file is not being used and then re-execute.

------------------------------

Code: 51??1308

Display: No authority for referenced F mark data file.

Used by:

Cause: There is no access authority for the F mark data file which is referred to in the specified

production program. This report is made when the mark data and production program are in different

files, the F mark data is required in the applicable machine type and the above error is detected.

Remedy:

------------------------------

Code: 51??1309

Display: No authority for referenced B mark data file.

Used by:

Cause: There is no access authority for the B mark data file which is referred to in the specified

production program. This report is made when the mark data and production program are in different

files, the B mark data is required in the applicable machine type and the above error is detected.

Remedy:

------------------------------

Code: 51??1310

Display: No authority for referenced M mark data file.

Used by:

Cause: There is no access authority for the M mark data file which is referred to in the specified

production program. This report is made when the mark data and production program are in different

files, the M mark data is required in the applicable machine type and the above error is detected.

Remedy:

------------------------------

Code: 51??1311

Display: No authority for referenced G mark data file.

Used by:

Cause: There is no access authority for the G mark data file which is referred to in the specified

production program. This report is made when the mark data and production program are in different

files, the G mark data is required in the applicable machine type and the above error is detected.

Remedy:

------------------------------

第 2217 页