FUJI错误代码查询.pdf - 第1985页
Used by: Cause: The IP address is incorrect. Remedy: The four groups of data must be punctuated by a period (.). ------------------------------ Code: 21008023 Display: IP_ADDRESS rimit error !! [0 - 255] Used by: Cause: …
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred when the feeder width was checked against the end of the station.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 2100794F
Display: "Space between feeders in PT file is insufficient"
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred due to interference between feeders.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21008001
Display: Command Format Error: makenet [-e] +wtlb
Used by:
Cause: An incorrect option is being used.
Remedy: Check the start-up option.
------------------------------
Code: 21008002
Display: Message not found!! No.= ****
Used by:
Cause: Unable to find the necessary message file.
Remedy: Re-install MCS/2E system.
------------------------------
Code: 21008010
Display: Edit file Open error !!
Used by:
Cause: The file created by the editor could not open ethernet_db.
Remedy: Create ethernet_db with the editor.
------------------------------
Code: 21008014
Display: Data base file Open error !!
Used by:
Cause: Unable to open data base files such as hosts, services, etc.
Remedy: Input ':' at the UCI menu and execute "/h0/cmds/attr -w /h0/etc/*" to enable the files to be
read.
------------------------------
Code: 21008020
Display: IP_ADDRESS not digit data !! "disit.digit.digit.digit"
Used by:
Cause: The IP address is incorrect.
Remedy: The IP address must be made up entirely of numerical digits.
------------------------------
Code: 21008021
Display: IP_ADDRESS data rimit over or nothing !! "123.123.123.123"
Used by:
Cause: The IP address is incorrect.
Remedy: Each address group must be between 1 and 3 digits.
------------------------------
Code: 21008022
Display: IP_ADDRESS not 4 data !! "1.2.3.4"
第 1984 页
Used by:
Cause: The IP address is incorrect.
Remedy: The four groups of data must be punctuated by a period (.).
------------------------------
Code: 21008023
Display: IP_ADDRESS rimit error !! [0 - 255]
Used by:
Cause: The IP address is incorrect.
Remedy: The address value must be between 0 and 255.
------------------------------
Code: 21008030
Display: REMOTEENT is nothing !! Please input REMOTEENT data.
Used by:
Cause: There is no remote host.
Remedy: Always set the remote host when using MCS/E installer.
------------------------------
Code: 21008040
Display: Data module make error !! E_code = ****
Used by:
Cause: Unable to create the "anetdb" data module.
Remedy: Re-install MCS/2E system.
------------------------------
Code: 21008041
Display: Data module fork error !!
Used by:
Cause: The process by which the "anetdb" data module is created cannot be started up.
Remedy: MCS/2E Re-install MCS/2E system.
------------------------------
Code: 21008042
Display: Unlink error !! <anetdb>
Used by:
Cause: The "anetdb" data module cannot be unlinked.
Remedy: Re-boot MCS/2E system
------------------------------
Code: 21008043
Display: Change directory error !! E_code = ****
Used by:
Cause: Unable to perform a directory change.
Remedy: The MCS/2E system directory cannot be created so re-install MCS/2E system.
------------------------------
Code: 21008050
Display: Message file open error !!
Used by:
Cause: Unable to open the message file directory.
Remedy: Re-install MCS/2E system.
------------------------------
Code: 21008051
Display: Message file data not found !!
Used by:
Cause: The target data is not in the message file.
Remedy: Re-install MCS/2E system.
第 1985 页
------------------------------
Code: 21008052
Display: Message file data error !!
Used by:
Cause: The message file contained inappropriate data.
Remedy: Re-install MCS/2E system.
------------------------------
Code: 21008100
Display: Message file set error
Used by:
Cause: The message file is damaged or does not exist. Or, there is no space left in the memory.
Remedy: Re-install the system and re-boot MCS.
------------------------------
Code: 21008101
Display: Command temporary file open error
Used by:
Cause: A temporary file could not be created because of a lack of RAM.
Remedy: Check how much RAM remains, and if there is no memory left, re-boot MCS.
------------------------------
Code: 21008102
Display: Command temporary file read error
Used by:
Cause: The temporary file is damaged, so it cannot read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 21008103
Display: Jobcon pipe open error
Used by:
Cause: The pipe does not exist.
Remedy: Re-boot MCS.
------------------------------
Code: 21008104
Display: Jobcon pipe write error
Used by:
Cause: The pipe does not exist.
Remedy: Re-boot MCS.
------------------------------
Code: 21008105
Display: Remote command is not allow
Used by:
Cause: The user attempted to execute an unexecutable command, or the remote command file format is
damaged.
Remedy: Check the command.
------------------------------
Code: 21008140
Display: No input host name
Used by:
Cause: There is no input host name.
Remedy: Input the host name into the EHOST environment file.
------------------------------
Code: 21008141
第 1986 页