FUJI错误代码查询.pdf - 第908页

Display: Parameter error Used by: Cause: A parameter is not within the setting range. Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor- Shell could be damaged. -------…

100%1 / 5282
Code: 1220301C
Display: Que error
Used by:
Cause: There is not a receiving data in the que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301D
Display: Que error
Used by:
Cause: Failed to clear que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301E
Display: Transmitting waiting state
Used by:
Cause: It is a transmitting waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 1220301F
Display: Receiving waiting state
Used by:
Cause: It is a receiving waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203020
Display: Que abort
Used by:
Cause: It had aborted before transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203021
Display: Que abort
Used by:
Cause: It had aborted during transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203022
第 907 页
Display: Parameter error
Used by:
Cause: A parameter is not within the setting range.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203023
Display: Process over
Used by:
Cause: The process exceeded the number of the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12204000
Display: Load error
Used by:
Cause: The load cell control-accuracy pressure control shell
failed in loading of DLL.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204001
Display: Load error
Used by:
Cause: The DLL-thread is not loaded in the load cell control-accuracy pressure control shell.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204002
Display: Multiple open
Used by:
Cause: The load cell control-accuracy pressure control shell been already opened.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204100
Display: Internal function error
Used by:
Cause: In the load cell control shell,the a mapping file error or
significant digit over error occurred.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
------------------------------
Code: 12204101
Display: Port open error
Used by:
Cause: The load cell control shell failed in a port opening.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
第 908 页
------------------------------
Code: 12204102
Display: Timeout error
Used by:
Cause: Internal function of the load cell control shell occurred.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
------------------------------
Code: 12204103
Display: Synchronous object error
Used by:
Cause: The synchronous object in the load cell control shell was destructed before releasing.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
------------------------------
Code: 12204104
Display: Que error
Used by:
Cause: In the load cell control shell,the number of que which stores a command became the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
------------------------------
Code: 12204200
Display: Internal function error
Used by:
Cause: In the accuracy pressure control shell,the a mapping file error or
significant digit over error occurred.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the accuracy pressure
control shell could be damaged.
------------------------------
Code: 12204201
Display: Port open error
Used by:
Cause: The accuracy pressure control shell failed in a port opening.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the accuracy pressure
control shell could be damaged.
------------------------------
Code: 12204202
Display: Timeout error
Used by:
Cause: Internal function of the accuracy pressure control shell occurred.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the accuracy pressure
control shell could be damaged.
------------------------------
Code: 12204203
Display: Synchronous object error
Used by:
Cause: The synchronous object in the accuracy pressure control shell was destructed before releasing.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the accuracy pressure
control shell could be damaged.
------------------------------
第 909 页