FUJI错误代码查询.pdf - 第2189页

Code: 51??0060 Display: The machine is transmitting. Used by: Cause: The machine with the specified nickname is presently transmitting other data. Remedy: Execute in return on completion mode or execute again after waiti…

100%1 / 5282
------------------------------
Code: 51??0053
Display: Not status data.
Used by:
Cause: The specified file is not status data.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
------------------------------
Code: 51??0054
Display: Machine type does not use mark data.
Used by:
Cause: The specified machine type does not use mark data. This message is reported if a machine type
which does not use mark data is detected during the mark data check. In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0055
Display: Machine type does not use nozzle data.
Used by:
Cause: The specified machine type does not use nozzle data. This message is reported if a machine type
which does not use nozzle data is detected during the nozzle data check In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0056
Display: Machine type does not use sequence data.
Used by:
Cause: The specified machine type does not use sequence data. At present this is not reported.
Remedy:
------------------------------
Code: 51??0057
Display: Machine type does not use device data.
Used by:
Cause: The specified machine type does not use device data. This message is reported if a machine type
which does not use device data is detected during the part data check. In such a case the content of the
production program is not checked.
Remedy:
------------------------------
Code: 51??0058
Display: Machine type does not use pallet data.
Used by:
Cause: The specified machine type does not use pallet data. At present this is not reported.
Remedy:
------------------------------
Code: 51??0059
Display: This machine type does not use GSS data.
Used by:
Cause: The specified machine type does not use GSS data.Presently,this error dose not display when it
occurs.
Remedy:
------------------------------
第 2188 页
Code: 51??0060
Display: The machine is transmitting.
Used by:
Cause: The machine with the specified nickname is presently transmitting other data.
Remedy: Execute in return on completion mode or execute again after waiting for a short time.
------------------------------
Code: 51??0061
Display: Incorrect reply from machine.
Used by:
Cause: An incorrect reply was reported from the machine. A description of the error is contained in the
supplementary information.
Remedy: Check the machine error code reported in the supplementary information and correct the data
or take other necessary steps.
------------------------------
Code: 51??0062
Display: Machine response time-up error.
Used by:
Cause: Even though the specified waiting time elapsed no response was returned from the machine.
Remedy: Check the machine status.
------------------------------
Code: 51??0063
Display: No program storage field in the machine.
Used by:
Cause: There is no field in the machine in which to download the program. There are already 10
production programs in the machine.
Remedy: After deleting unnecessary programs, execute download.
------------------------------
Code: 51??0064
Display: Program already exists.
Used by:
Cause: The specified production program is already in the machine.
Remedy: If downloading a program with the same name, append the overwrite option and then download.
Alternatively, execute download after deleting the relevant program.
------------------------------
Code: 51??0065
Display: There is no program.
Used by:
Cause: The specified production program is not in the machine.
Remedy:
------------------------------
Code: 51??0066
Display: Program in the foreground.
Used by:
Cause: Although the specified production program is already in the machine foreground, an attempt was
made to download it to the machine background.
Remedy:
------------------------------
Code: 51??0067
Display: Program in the background.
Used by:
Cause: Although the specified production program is already in the machine background, an attempt
第 2189 页
was made to download it to the machine foreground.
Remedy:
------------------------------
Code: 51??0068
Display: Non-deletable program.
Used by:
Cause: Among the programs specified for deletion there is a program which cannot be deleted.
Remedy:
------------------------------
Code: 51??0069
Display: No program.
Used by:
Cause: The program specified for deletion is not in the machine or if several programs have been
specified for deletion, one of them is not in the machine.
Remedy:
------------------------------
Code: 51??0070
Display: Too many programs specified.
Used by:
Cause: Too many programs have been specified for deletion.
Remedy: No more than ten programs can be specified since there are only a maximum of ten programs in
the machine.
------------------------------
Code: 51??0071
Display: Specified machine is a slave.
Used by:
Cause: The machine specified by its nickname is a slave. Production information cannot be acquired
from a slave.
Remedy: Check the nickname and specify a master.
------------------------------
Code: 51??0079
Display: Specified machine does not support the command.
Used by:
Cause: The command cannot be performed because the specified machine does not support it.
Remedy:
------------------------------
Code: 51??0080
Display: Production log acquisition has already ended.
Used by:
Cause: Production data log acquisition for the applicable machine has already been ended with the finish
command.
Remedy: To perform production data log acquisition, it is necessary to restart the C/C.
------------------------------
Code: 51??0081
Display: Real-time process simultaneous start limit exceeded.
Used by:
Cause: For the same machine up to four real-time commands may be started/operated at the same time.
However, an attempt was made to start a fifth real-time command.
Remedy: Check that no real-time commands are being executed at the machine.
------------------------------
Code: 51??0082
第 2190 页