FUJI错误代码查询.pdf - 第2270页

------------------------------ Code: 52??1011 Display: No tQ line in "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-". Used by: Cause: The tQ line was not found in "BLOCK", "…

100%1 / 5282
program.
------------------------------
Code: 52??1005
Display: "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" is multiply defined.
Used by:
Cause: The "BLOCK", "PGHEAD-" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 52??1006
Display: "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" is multiply defined.
Used by:
Cause: The "BLOCK", "SEQUENCE+" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 52??1007
Display: "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" is multiply defined.
Used by:
Cause: The "BLOCK", "DEVICE+" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 52??1008
Display: No "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: "BLOCK", "IMAGE-" was not found in "UNIT", "PROGRAM" in the specified transmission image
type production program. Alternatively, "BLOCK", "RDCCIMG-" was not found in "UNIT", "PROGRAM" in
the transmission image type partial data.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production
program. Alternatively, check the setting made for "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the
partial data or "FILESTRUCT" in "UNIT", "STRUCT".
------------------------------
Code: 52??1009
Display: No vQN line in "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: The vQN line was not found in "BLOCK", "IMAGE-" in "UNIT", "PROGRAM" in the specified
transmission image type production program. Alternatively, the vQN line was not found in "BLOCK",
"RDCCIMG-" in "UNIT", "PROGRAM" in the transmission image type partial data.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production program.
Alternatively, check the content of "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the partial data.
------------------------------
Code: 52??1010
Display: No dQ line in "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: The dQ line was not found in "BLOCK", "IMAGE-" in "UNIT", "PROGRAM" in the specified
transmission image-type production program.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production program.
第 2269 页
------------------------------
Code: 52??1011
Display: No tQ line in "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-".
Used by:
Cause: The tQ line was not found in "BLOCK", "RDCCIMG-" in "UNIT", "PROGRAM" in the specified
transmission image-type partial data.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the partial data.
------------------------------
Code: 52??1012
Display: "UNIT", "PROGRAM" - "BLOCK", "HEADER-" format error.
Used by:
Cause: A format error was detected in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in the specified
production program was read.
Remedy: Check the setting for "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production program.
------------------------------
Code: 52??1013
Display: Format error in "MCTYPE" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "MCTYPE" in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in
the specified production program was read.
Remedy: Check the setting for "MCTYPE" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 52??1014
Display: Format error in "NAME" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "NAME" in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in the
specified production program was read.
Remedy: Check the setting for "NAME" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production
program.
------------------------------
Code: 52??1015
Display: Format error in "DEV_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "DEV_NUM" in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in
the specified production program was read.
Remedy: Check the setting for "DEV_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 52??1016
Display: Format error in "EL_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "EL_NUM" in "BLOCK", "HEADER" when "UNIT", "PROGRAM" in
the specified production program was read.
Remedy: Check the setting for "EL_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 52??1017
Display: Format error in "TRAY_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "TRAY_NUM" in "BLOCK", "HEADER-" when "UNIT", "PROGRAM"
第 2270 页
in the specified production program was read.
Remedy: Check the setting for "TRAY_NUM" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 52??1018
Display: Format error in "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-".
Used by:
Cause: A format error was detected in "BLOCK", "PGHEAD-" when "UNIT", "PROGRAM" in the specified
production program was read.
Remedy: Check the setting for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production program.
------------------------------
Code: 52??1019
Display: No "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" item definition line.
Used by:
Cause: The "BLOCK", "SEQUENCE+" item definition line was not found when "UNIT", "PROGRAM" in the
specified production program was read.
Remedy: Check the setting for the item definition line in "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+"
in the production program.
------------------------------
Code: 52??1020
Display: "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" item definition format error.
Used by:
Cause: A format error was detected in the "BLOCK", "SEQUENCE+" item definition line when "UNIT",
"PROGRAM" in the specified production program was read.
Remedy: Check the setting for the item definition line in "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+"
in the production program.
------------------------------
Code: 52??1021
Display: "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" format error.
Used by:
Cause: A format error was detected in the "BLOCK", "SEQUENCE+" data when "UNIT", "PROGRAM" in
the specified production program was read.
Remedy: Check the data settings for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program. Normally the sequence number in which the error occurred is reported to the supplementary
information line. Check this line.
------------------------------
Code: 52??1022
Display: No "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" item definition line.
Used by:
Cause: The "BLOCK", "DEVICE+" item definition line was not found when "UNIT", "PROGRAM" in the
specified production program was read.
Remedy: Check the setting for the item definition line in "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in
the production program.
------------------------------
Code: 52??1023
Display: "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" item definition format error.
Used by:
Cause: A format error was detected in the item definition line in "BLOCK", "DEVICE+" when "UNIT",
"PROGRAM" in the specified production program was read.
Remedy: Check the setting for the item definition line in "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in
the production program.
第 2271 页