FUJI错误代码查询.pdf - 第2116页

Used by: Cause: There is no transmit descriptor. Remedy: Re-execute the function. If the error continues to occur, re-install the system. ------------------------------ Code: 22007511 Display: DTX7511 ERROR Used by: Caus…

100%1 / 5282
------------------------------
Code: 2100FF0D
Display: check flag rewrite error
Used by:
Cause: The check flag could not be rewritten.
Remedy: Check that the file overwrite protector is not set to prevent overwriting.
------------------------------
Code: 2100FF0E
Display: Status data no. **** over
Used by:
Cause: The **** status data item is out of range.
Remedy: Correct the item.
------------------------------
Code: 2100FF0F
Display: '+' option not found
Used by:
Cause: The '+' option could not be found at start-up.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF10
Display: check flag data read error
Used by:
Cause: The check flag could not be read.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF11
Display: On_line production report is not supported
Used by:
Cause: The on-line function is not currently supported.
Remedy: Specify local or on_line in the production_report section of Status data.
------------------------------
Code: 2110B175
Display: Part data load error
Used by:
Cause: Unable to load Part data.
Remedy: Check that Part data exists.
------------------------------
Code: 2110B176
Display: Can't expand program data.
Used by:
Cause: Cannot expand program data.
Remedy: Check and correct the production program.
------------------------------
Code: 21200EB0
Display: can't write runlevel_list_file /R0
Used by:
Cause: Data could not be written to the Run Level List file (R0/USER/r_list).
Remedy: Re-boot MCS.
------------------------------
Code: 2200750B
Display: DTX750B error
第 2115 页
Used by:
Cause: There is no transmit descriptor.
Remedy: Re-execute the function. If the error continues to occur, re-install the system.
------------------------------
Code: 22007511
Display: DTX7511 ERROR
Used by:
Cause: The program for which a download was requested could not be opened.
Remedy: The requested program does not exist in MCS. Use the error file directory to check the file.
------------------------------
Code: 22007512
Display: DTX7512 ERROR
Used by:
Cause: Transmission was made to the machine while the communication pipe was in use.
Remedy: Wait a while and try to download again. If the error recurs, re-boot MCS.
------------------------------
Code: 22007514
Display: DTX7514 ERROR
Used by:
Cause: The machine type is wrong.
Remedy: Check the transmission file (Program, Proper) machine types and compare them with the
previously transmitted machine types.
------------------------------
Code: 22007515
Display: DTX7515 error
Used by:
Cause: The program check discovered an error in the requested program.
Remedy: Request the program again. Check that there are no errors in the program.
------------------------------
Code: 2200AA00
Display: GDXAA00 ERROR or GXQAA00 ERROR
Used by:
Cause: The requested GD file or GQ file does not exist in MCS.
Remedy: Use the file services directory to check the file.
------------------------------
Code: 2200AB00
Display: DTXAB00 ERROR
Used by:
Cause: During downloading, an answer was not received from the machine within the preset time limit
(dT -> DTO).
Remedy: Check that the machine and MCS are both booted up (HELPS).
------------------------------
Code: 2200AB01
Display: DTXAB01 ERROR
Used by:
Cause: While the program was being downloaded, a communication error was returned from the
machine.
Remedy: Select the [Ctrl] and [E] keys from the UCI menu to get an error display. Refer to the errors from
the machine for more details.
------------------------------
Code: 2200AB02
第 2116 页
Display: DTXAB02 ERROR
Used by:
Cause: The nozzle file was not specified in the program being downloaded.
Remedy: Check that the nozzle file has been specified. If it has not, use the file services directory to
check the file (HELPS).
------------------------------
Code: 2200AB03
Display: DTXAB03 ERROR
Used by:
Cause: The pallet file was not specified in the program being downloaded.
Remedy: If ".nickname" is appended to the program name, the production program name is the same as
the pallet filename. If ".nickname" is not appended to the program name, use the file services directory to
check whether or not there is a production program filename with this appendage.
------------------------------
Code: 2200AB04
Display: DTXAB04 ERROR
Used by:
Cause: The requested program's Part data does not exist.
Remedy: Use the file services directory to check the requested program's Part data file.
------------------------------
Code: 23000001
Display: MCS-X Application error.
Used by:
Cause: A critical system error has occurred. Either the MCS-X version upgrade was not installed
properly, or the MCS-X system file or other data has been corrupted.
Remedy: Uninstall the MCS-X system, the install it again.
------------------------------
Code: 23000002
Display: Cannot access EXE or DLL files. [File name]
Used by:
Cause: An attempt to access the Execution file or Library file failed.
Remedy: The system version upgrade may not have been performed properly. Reinstall the MCS-X
system.
------------------------------
Code: 23000003
Display: Cannot ascertain dll's function. [File name]
Used by:
Cause: The data required by MCS-X could not be obtained from the Library file.
Remedy: The DLL file may be corrupted. Reinstall the MCS-X system.
------------------------------
Code: 23000004
Display: Memory allocation error.
Used by:
Cause: The memory does not have enough space available.
Remedy: End all other applications which are running, then restart MCS-X after the necessary memory
space has been made available.
------------------------------
Code: 23000005
Display: Machine type can not be ascertained from file. Recheck the file.
Used by:
Cause: Either the specified CCIMF file was not found, or the MCTYPE item was not found in the file.
第 2117 页