FUJI错误代码查询.pdf - 第1074页
Remedy: Check the CCD level and the program Mark data. ------------------------------ Code: 14010007 Display: err0007 Used by: GL2,GL5,GSP2,GSP3,IP1 Cause: The perimeter of the fiducial mark is too small. Remedy: Check t…
Display: "Multiple pilot board Error"
Used by: QP242,QP201
Cause: The machine contains two or more pilot boards at one time. This error might also be caused by a
malfunction of the sensor that detects pilot boards.
Remedy: Remove the pilot board from the ICM side of the first placing module, then feed it back into the
machine after all the boards currently in the machine have been fed out.
------------------------------
Code: 14010000
Display: Image Process Time Over
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The vision processing could not be carried out within the preset time limit.
Remedy: Check mark_data.
------------------------------
Code: 14010001
Display: err0001
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) could not be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010002
Display: err0002
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) does not form a closed shape.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010003
Display: err0003
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is not the color specified in the Black/White item and the edge
of the mark ( the border between the mark color and base color) could not be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010004
Display: err0004
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The color of the first search point is the color specified in the Black/White item but the edge of
the mark (the border between the mark color and base color) does not form a closed shape.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010005
Display: err0005
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010006
Display: err0006
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
第 1073 页
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010007
Display: err0007
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The perimeter of the fiducial mark is too small.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010008
Display: err0008
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Processing interrupted as the perimeter of the fiducial mark is too large.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010009
Display: err0009
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Noise was discovered (small areas with the same color as the mark) but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000A
Display: err000A
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000B
Display: err000B
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000C
Display: err000C
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area larger than the fiducial mark of the opposite color from the mark was found but no mark
could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000D
Display: err000D
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000E
Display: err000E
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
第 1074 页
Code: 14010010
Display: err0010
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: When performing vision processing using an intersecting squares fiducial mark, a mark smaller
than the fiducial mark was discovered.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010014
Display: err0014
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too large in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010015
Display: err0015
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too big in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010016
Display: err0016
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too small in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010017
Display: err0017
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too big in the Y direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010018
Display: err0018
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too small in the Y direction.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010050
Display: err0050
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the top of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010051
Display: err0051
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the bottom of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010052
Display: err0052
第 1075 页