FUJI错误代码查询.pdf - 第1213页

Remedy: An error occurred at FfSendLSAcquireAreaCmd(). The reply value for FfSendLSAcquireAreaCmd() is in the ulSubCode. This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain t…

100%1 / 5282
Display: 1CFF0004
Used by:
Cause: Shared memory failed to open.
Remedy: The shared memory which contains the start conditions for the vision processing process group
failed to open. This is not a common error. There could be a visionsystem abnormality. Restart the
system. Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0005
Display: 1CFF0005
Used by:
Cause: Error at vision processing board.
Remedy: An error reply was received from the Cognex vision processing board. The reply code from the
board is in the ulSubCode. This is not a common error. There could be a visionsystem abnormality.
Restart the system. Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0010
Display: 1CFF0010
Used by:
Cause: The prescribed number of "acquire thread" starts was exceeded, and a vision processing request
occurred.
Remedy: Obtain the vision processing results, and specify the "Idle" mode for the acquire thread.
------------------------------
Code: 1CFF0011
Display: 1CFF0011
Used by:
Cause: Could not connect to the shared memory for vision processing data.
Remedy: An error occurred at the RtOpenSharedMemory(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0012
Display: 1CFF0012
Used by:
Cause: Failed to generate a handling semaphore.
Remedy: An error occurred at the RtCreateSemaphore(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0013
Display: 1CFF0013
Used by:
Cause: Failed to transmit the image acquisition command.
Remedy: An error occurred at ffSendStartTrigAcquireCmd(). The reply value for
ffSendStartTrigAcquireCmd() is in the ulSubCode. This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0014
Display: 1CFF0014
Used by:
Cause: Failed to transmit the acquisition area command.
第 1212 页
Remedy: An error occurred at FfSendLSAcquireAreaCmd(). The reply value for
FfSendLSAcquireAreaCmd() is in the ulSubCode. This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0015
Display: 1CFF0015
Used by:
Cause: Failed to transmit the live image display command.
Remedy: An error occurred at FfSendRealtimeAcquireCmd(). The reply value for
FfSendRealtimeAcquireCmd() is in the ulSubCode. This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0016
Display: 1CFF0016
Used by:
Cause: Failed to transmit the abort command.
Remedy: An error occurred at FfSendFlushCmd(). The reply value for FfSendFlushCmd() is in the
ulSubCode. This is not a common error. There could be a visionsystem abnormality. Restart the system.
Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0017
Display: 1CFF0017
Used by:
Cause: A waiting period time-up condition occurred for reception of the image acquisition command.
Remedy: A "reception completed" status was not reported from the VP within the prescribed period. At
present, the VA has no wait period (unlimited wait), so this error does not occur.
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0018
Display: 1CFF0018
Used by:
Cause: A waiting period time-up condition occurred for reception of the acquisition area setting
command.
Remedy: A "reception completed" status was not reported from the VP within the prescribed period. At
present, the VA has no wait period (unlimited wait), so this error does not occur.
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0019
Display: 1CFF0019
Used by:
Cause: A waiting period time-up condition occurred for reception of the saved image display command.
Remedy: A "reception completed" status was not reported from the VP within the prescribed period. At
present, the VA has no wait period (unlimited wait), so this error does not occur.
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF001A
第 1213 页
Display: 1CFF001A
Used by:
Cause: A waiting period time-up condition occurred for reception of the abort command.
Remedy: A "reception completed" status was not reported from the VP within the prescribed period. At
present, the VA has no wait period (unlimited wait), so this error does not occur.
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF001B
Display: 1CFF001B
Used by:
Cause: Failed to wait for the brightness measurement response.
Remedy: An error occurred at ffGetSMD3BrightCheckRsp(). This is not a common error. There could be
a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF001C
Display: 1CFF001C
Used by:
Cause: Failed to wait for the bad mark vision processing response.
Remedy: An error occurred at ffGetSMD3BlockSkipRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF001D
Display: 1CFF001D
Used by:
Cause: Failed to wait for the calibration measurement response.
Remedy: An error occurred at ffGetSMD3CalCheckRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF001E
Display: 1CFF001E
Used by:
Cause: Failed to wait for the part vision processing response.
Remedy: An error occurred at ffGetSMD3InspectDeviceRsp(). This is not a common error. There could be
a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF001F
Display: 1CFF001F
Used by:
Cause: Failed to wait for the fiducial mark measurement response.
Remedy: An error occurred at ffGetSMD3InspectFiducialRsp(). This is not a common error. There could
be a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF0020
Display: 1CFF0020
Used by:
第 1214 页