FUJI错误代码查询.pdf - 第1484页

------------------------------ Code: 1D17D000 Display: Used by: Cause: The part pickup slippage was too large (X direction). Remedy: Check how the parts are being supplied. ------------------------------ Code: 1D17D080 D…

Code: 1D17C1??

Display:

Used by:

Cause: A lead could not be detected on the lower side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C2??

Display:

Used by:

Cause: A lead could not be detected on the right side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C3??

Display:

Used by:

Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C4??

Display:

Used by:

Cause: An edge could not be detected on the left side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C5??

Display:

Used by:

Cause: An edge could not be detected on the lower side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C6??

Display:

Used by:

Cause: An edge could not be detected on the right side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17C7??

Display:

Used by:

Cause: An edge could not be detected on the upper side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

第 1483 页

------------------------------

Code: 1D17D000

Display:

Used by:

Cause: The part pickup slippage was too large (X direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D17D080

Display:

Used by:

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D17E???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D17F???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D184001

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184002

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184003

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184005

第 1484 页

Display:

Used by:

Cause: The X length of the body is more than 15% larger than the value in Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184006

Display:

Used by:

Cause: The body size in the X direction is less than 85% of the value in Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184007

Display:

Used by:

Cause: The Y length of the body is more than 15% larger than the value in Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D184008

Display:

Used by:

Cause: The body size in the Y direction is less than 85% of the value in Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D188002

Display:

Used by:

Cause: The part was not picked. The nozzle used with this part is too large.Vision processing could not

detect any part.

Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower

the CCD level so that parts can be detected.

------------------------------

Code: 1D188100

Display:

Used by:

Cause: This Computer Vision No. is not supported.

Remedy: Check the Computer Vision No. in Part Data.

------------------------------

Code: 1D188110

Display:

Used by:

Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.

Remedy: Specify Lead_pitch in Part data.

------------------------------

Code: 1D188111

Display:

Used by:

Cause: Lead_width in Part data has not been specified.

Remedy: Specify Lead_width in Part data.

------------------------------

Code: 1D188112

Display:

第 1485 页