FUJI错误代码查询.pdf - 第280页
Used by: QP242 The first "?" is the station number. The last two "??" are the device number in hexadecimal code. For inputs of 256 and above, 256 is subtracted. Cause: Although the continuous pass flu…
Display: Same as code.
Used by: QP201,QP202,QP202
Cause: The placement device number is an odd number.
(The first "?" represents the station number and the following "??" represent the device number within the
station. The numbering is hexadecimal. For device numbers higher than 256, subtract 256.)
Remedy: Enter an even number for the placement device number.
------------------------------
Code: 11D0D???
Display: Same as code
Used by: QP202
Cause: The settings for the rotation of the Q-axis are outside the acceptable range.
(The first "?" represents the station number and the following "??" represent the device number within the
station. The numbering is hexadecimal. For device numbers higher than 256, subtract 256.)
Remedy: Check the settings at "prog_polarity" (program header), "pd_polarity" (device data),
"parts_pickup_Q" - "direction" (part data) and "Q" in sequence data.
------------------------------
Code: 11D10???
Display: 11D10???
Used by: CP652C
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Cause: A part height (Component_height) which is specified in the part data is incorrect.
Remedy: Change the part data height to match the height of the actual part being used, and then
retransmit the program.
------------------------------
Code: 11D20???
Display: 11D20???
Used by: CP652C
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Cause: Index_Speed_CP5 (Cam_speed_CP4 on the FCP4) in part data is set to 0.
Remedy: After specifying an appropriate value for the device being used, retransmit the program.
------------------------------
Code: 11D21???
Display: 11D21???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by:
Cause: The nozzle over strokes because the specified pressure is too high. (Common) The placing
pressure (gf) which is specified in part data exceeds the valid range. When a part is placed, the amount of
negative movement (that is, movement past the point of placement) should be greater than 0.5 mm and
less than 2.5 mm. The placing pressure specified here results in this movement being exceeded (FIP3).
Remedy: In part data, specify a nozzle with a strong spring force and reduce the amount of placing
pressure. Adjust the position of the placing pressure sensor. (Common) Change the specified placing
pressure value or change the nozzle which is used with the pressure control function (FIP3).
------------------------------
Code: 11D22???
Display: 11D22???
第 279 页
Used by: QP242
The first "?" is the station number. The last two "??" are the device number in hexadecimal code. For
inputs of 256 and above, 256 is subtracted.
Cause: Although the continuous pass flux (or stroke flux) method is set in the device data, the
application head speed has not been set.
The item "Apply Head Speed" in part data has not been set.
Remedy: Specify an appropriate value and retransmit the production program.
------------------------------
Code: 11D30???
Display: 11D30???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by:
Cause: The number of feeding times (Feeding_tim_CP4,5) specified in part data is inappropriate.
Remedy: Change the number of feeding times for the relevant feeder (device) and then re-transmit the
program.
------------------------------
Code: 11D31???
Display: 11D31???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by:
Cause: The package type which is specified in part data is incorrect.
Remedy: Specify correct data for 4. Package_type in Part data's Package_and_appearance data.
------------------------------
Code: 11D40???
Display: 11D40???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by:
Cause: The tray type setting is incorrect.
Remedy: Specify correct data for 11. (Tray:) Tray_type in Part data's Package_and_appearance_data.
------------------------------
Code: 11D41???
Display: 11D41???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by: QP242,QP201,QP202,QP203
Cause: The x direction pitch data for the parts arranged in the tray is not specified.
Remedy: Specify correct data for 14. (Tray:) Component_pitch_x in Part data's
Package_and_appearance_data.
------------------------------
Code: 11D42???
Display: 11D42???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
第 280 页
Used by: QP242,QP201,QP202,QP203
Cause: The y direction pitch data for the parts arranged in the tray is not specified.
Remedy: Specify correct data for 15. (Tray:) Component_pitch_y in Part data's
Package_and_appearance_data.
------------------------------
Code: 11D43???
Display: 11D43???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by: QP242,QP201,QP202,QP203
Cause: The number of parts arranged in the x direction in the tray is not specified.
Remedy: Specify correct data for 16. (Tray:) Cavities_x in Part data's Package_and_appearance_data.
------------------------------
Code: 11D44???
Display: 11D44???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by: QP242,QP201,QP202,QP203
Cause: The number of parts arranged in the y direction in the tray is not specified.
Remedy: Specify correct data for 17. (Tray:) Cavities_y in Part data's Package_and_appearance_data.
------------------------------
Code: 11D45???
Display: 11D45???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by: QP242,QP201,QP202,QP203
Cause: The x coordinate of the point at which the tray is picked up in order to be discarded is not
specified.
Remedy: Specify correct data for 21. (Tray:) Tray_pickup_pnt_x in Part data's
Package_and_appearance_data.
------------------------------
Code: 11D46???
Display: 11D46???
The first number in ??? indicates the station number (in hexadecimal).
The following two numbers indicate the device number in that station.
For device numbers above 256, 256 is displayed.
Used by: QP242,QP201,QP202,QP203
Cause: The y coordinate of the point at which the tray is picked up in order to be discarded is not
specified.
Remedy: Specify correct data for 23. (Tray:) Tray_pickup_pnt_y in Part data's
Package_and_appearance_data.
------------------------------
Code: 11D47???
Display: Same as code The value replacing the first "?" is the station number; the values for the remaining
"??" indicate a device number within that station. These numbers appear as hexadecimal values. When a
device number greater than 256 is indicated, subtract 256 to find the device number.
Used by: QP242,QP201,QP202,QP203
Cause: No value has been set for the tray size X dimension.
第 281 页