FUJI错误代码查询.pdf - 第171页

Remedy: Confirm that the Proper data item 526: [PM] Creep Speed Z was set. If not, input correct data. ------------------------------ Code: 11022A16 Display: 11022A16 Used by: Cause: One of the settings H_X, M_X, L_X for…

Cause: The pulse count for the PI-axis plus direction limit was not set.

Remedy: Specify the correct data for 143. Max Limit Position PI in Proper data.

------------------------------

Code: 11022A0C

Display: 11022A0C

Used by: QP132

Cause: The pulse count for the PO-axis plus direction limit was not set.

Remedy: Specify the correct data for 166. Max Limit Position PO in Proper data.

------------------------------

Code: 11022A0D

Display: 11022A0D

Used by: QP132

Cause: The pulse count for the F-axis plus direction limit was not set.

Remedy: Specify the correct data for 145. Max Limit Position F in Proper data.

------------------------------

Code: 11022A0E

Display: 11022A0E

Used by:

Cause: The X-axis servo zero setting speed was not specified in PM Proper data.

Remedy: Confirm that the Proper data item 520: [PM] Zero Setup Speed X is set. If not, input correct data.

------------------------------

Code: 11022A0F

Display: 11022A0F

Used by:

Cause: The Y-axis servo zero setting speed was not specified in PM Proper data.

Remedy: Confirm that the Proper data item 521: [PM]Zero Setup Speed Y was set. If not, input correct

data.

------------------------------

Code: 11022A11

Display: 11022A11

Used by:

Cause: The Z-axis servo zero setting speed was not specified in PM Proper data.

Remedy: Confirm that the Proper data item 522: [PM] Zero Setup Speed Z was set. If not, input correct

data.

------------------------------

Code: 11022A12

Display: 11022A12

Used by:

Cause: The creep speed for X-axis servo zero setting was not specified in the common PM Proper data.

Remedy: Confirm that the Proper data item 524: [PM] Creep Speed X was set. If not, input correct data.

------------------------------

Code: 11022A13

Display: 11022A13

Used by:

Cause: The creep speed for Y-axis servo zero setting was not specified in the common PM Proper data.

Remedy: Confirm that the Proper data item 525: [PM] Creep Speed Y was set. If not, input correct data.

------------------------------

Code: 11022A15

Display: 11022A15

Used by:

Cause: The creep speed for Z-axis servo zero setting was not specified in the common PM Proper data.

第 170 页

Remedy: Confirm that the Proper data item 526: [PM] Creep Speed Z was set. If not, input correct data.

------------------------------

Code: 11022A16

Display: 11022A16

Used by:

Cause: One of the settings H_X, M_X, L_X for the X-axis movement speed was not specified in the

common PM Proper data.

Remedy: Confirm that the Proper data items 528: [PM] Move Speed H_X, 529: [PM] M_X, and 530: [PM]

Move speed L_X are set. If not, input correct data.

------------------------------

Code: 11022A17

Display: 11022A17

Used by:

Cause: One of the settings H_Y, M_Y, L_Y for the Y-axis movement speed was not specified in the

common PM Proper data.

Remedy: Confirm that the Proper data items 531: [PM] Move Speed H_Y, 532: [PM] M_Y, and 533: [PM]

Move speed L_Y are set. If not, input correct data.

------------------------------

Code: 11022A18

Display: 11022A18

Used by:

Cause: One of the settings H_Q, M_Q, L_Q for the Q-axis movement speed was not specified in the

common PM Proper data.

Remedy: Confirm that the Proper data items 537: [PM] Move Speed H_Q, 538: [PM] M_Q, and 539: [PM]

Move speed L_Q are set. If not, input correct data.

------------------------------

Code: 11022A19

Display: 11022A19

Used by:

Cause: One of the settings H_Z, M_Z, L_Z for the Z-axis movement speed was not specified in the

common PM Proper data.

Remedy: Confirm that the Proper data items 534: [PM] Move Speed H_Z, 535: [PM] M_Z, and 536: [PM]

Move speed L_Z are set. If not, input correct data.

------------------------------

Code: 11022A1A

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The transmitted Proper data indicates a different machine type.

Remedy: Use F4G to retransmit the Proper data for the machine in question.

------------------------------

Code: 11022A1B

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The specified PLM quantity is outside the valid range.

Remedy: Set a value from 1 to 6 for "The Number of PLM (QP2)" in the Proper data.

------------------------------

Code: 11022A1C

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: A value has not been set for the PLM servo counter output interval.

Remedy: Set a value of 1 or greater for the "Counter Output Interval (QP2)" parameter in the Proper data.

第 171 页

------------------------------

Code: 11022A1D

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The board quantity specified for vision processing is outside the valid range.

Remedy: Set a value from 1 to 6 for "The Number of Vision Processor (QP2)" in the Proper data.

------------------------------

Code: 11022A1E

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Parts Camera Type (QP2)" setting (which indicates the vision processing camera type)

is outside the valid range. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct camera type for the "PLM? Parts Camera Type (QP2)" parameter in the Proper

data.

------------------------------

Code: 11022A1F

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Mark Camera MPX ch. No. (QP2)" setting (which indicates the number of the

multiplexer port that the mark camera is connected to) either is outside the valid range, or duplicates

another setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 12) for the "PLM? Mark Camera MPX ch. No.

(QP2)" parameter in the Proper data.

------------------------------

Code: 11022A20

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Parts Camera MPX ch. No. (QP2)" setting (which indicates the number of the

multiplexer port that the RS vision processing camera is connected to) either is outside the valid range, or

duplicates another setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 12) for the "PLM? Parts Camera MPX ch. No.

(QP2)" parameter in the Proper data.

------------------------------

Code: 11022A21

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? LSO ch. No. (QP2)" setting (which indicates the number of the LSO board port that the

LS vision processing camera is connected to) either is outside the valid range, or duplicates another

setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 4) for the "PLM? LSO ch. No. (QP2)" parameter in

the Proper data.

------------------------------

Code: 11022A22

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? LSO board No. (QP2)" setting (which indicates the number of the LSO board that the

LS vision processing camera is connected to) is outside the valid range. The value for the "?" in the

parameter name indicates the module number.

Remedy: Set the correct board number (either 1 or 2) for the "PLM? LSO board No. (QP2)" parameter in

the Proper data.

------------------------------

第 172 页