FUJI错误代码查询.pdf - 第401页

Display: Used by: QP242,QP201,QP202,QP203 Cause: Unit number C (UDP/IP/ARCNET). Received IP data used a non-existent port number. Remedy: Turn off the machine power. ------------------------------ Code: 12031C30 Display:…

100%1 / 5282
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET) IP header check sum error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C25
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). IP header sub-heading is incorrect (the partitioned IP packet
sub-headings are not the same).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C26
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Creation time was insufficient so the packet was discarded.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C27
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Time between placement of partitioned packets exceeded 15
seconds.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C28
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Incorrect original transmission internet address.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C29
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Incorrect internet address.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C2A
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Incorrect protocol number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C2B
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Received IP packet used an Internet address that does not
exist.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C2C
第 400 页
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Received IP data used a non-existent port number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C30
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). ICPM header includes incorrect information.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C31
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Unsupported ICPM was received.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C32
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Unsupported ICPM was requested.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C33
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Transmitted packet did not arrive at the network (an
incorrect internet address was used (ICPM)).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C34
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Transmitted packet did not arrive at the HOST (an incorrect
internet address was used (ICPM)).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C35
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Transmitted packet did not use the correct protocol number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C36
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Transmitted IP packet data did not arrive at the specified port
number.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C37
第 401 页
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Transmitted packet creation time was insufficient so packet
was discarded.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C38
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). Time between placement of transmitted partitioned packets
exceeded 15 seconds (ICPM).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C39
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (UDP/IP/ARCNET). iTransmitted IP header includes incorrect information.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C40
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (SECS I/II). T1 (character time) error.
Remedy: Turn off the machine power.
------------------------------
Code: 12031C41
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (SECS I/II). EOT waiting time exceeded T2 (protocol time).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C42
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (SECS I/II). ACK waiting time exceeded T2 (protocol time).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C43
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (SECS I/II). Data waiting time exceeded T2 (protocol time).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C44
Display:
Used by: QP242,QP201,QP202,QP203
Cause: Unit number C (SECS I/II). Specified transmission retry times were exceeded (NKS re-
transmission processing counter).
Remedy: Turn off the machine power.
------------------------------
Code: 12031C45
第 402 页