FUJI错误代码查询.pdf - 第799页

Cause: Z-axis ascent timed out for nozzle B. The question marks represents the module number, and the asterisks represent the error code. Remedy: Check that axis movement is not being interfered with, and that movement i…

100%1 / 5282
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle E.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?2F
Display: PM?? ERROR Code: ********
"Z-axis down time out"
Used by: QP132
Cause: Z-axis descent timed out for nozzle F.
The question marks represent the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?30
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Regenerative Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Regenerative error in the Z-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207A?31
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Excessive Deviation" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive deviation in the Z-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Check whether the motor power wires (U, V, and W) or the encoder wire have
becomebroken or short-circuited. Servopack replacement may be necessary.
------------------------------
Code: 1207A?3A
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
Cause: Z-axis ascent timed out for nozzle A.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?3B
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
第 798 页
Cause: Z-axis ascent timed out for nozzle B.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?3C
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
Cause: Z-axis ascent timed out for nozzle C.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?3D
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
Cause: Z-axis ascent timed out for nozzle D.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?3E
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
Cause: Z-axis ascent timed out for nozzle E.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?3F
Display: PM?? ERROR Code: ********
"Z-axis up time out"
Used by: QP132
Cause: Z-axis ascent timed out for nozzle F.
The question marks represents the module number, and the asterisks represent the error code.
Remedy: Check that axis movement is not being interfered with, and that movement is normal along the
entire length of the axis.
------------------------------
Code: 1207A?40
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overvoltage" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive voltage has been detected in the Z-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Servopack replacement may be necessary.
第 799 页
------------------------------
Code: 1207A?51
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Excessive Acce1. (Over 10%)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive acceleration detected in the Z-axis servopack (detected at 110%).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the motor power wires (U, V, and W) or the encoder wire have become broken or
short-circuited.
------------------------------
Code: 1207A?60
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Absolute Error" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: Absolute error in the Z-axis servopack (for the absolute value encoder only).
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
faulty hardware such as servo amps or servo boards may be the cause.
------------------------------
Code: 1207A?62
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Parameter Destroyed" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis servopack parameter destroyed.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207A?64
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Incorrect Parameter" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis servopack parameter setting error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207A?65
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Watch-dog Monitoring Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis servopack watchdog error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
第 800 页