FUJI错误代码查询.pdf - 第1359页
Used by: Cause: The lead could not be found. Remedy: Check the part size and orientation. ------------------------------ Code: 1D0C401C Display: Used by: Cause: The lead could not be found. Remedy: Check the part size an…
------------------------------
Code: 1D0C400D
Display:
Used by:
Cause: The lead pitch is too wide and/or the lead width is too wide.
Remedy: Check the part.
------------------------------
Code: 1D0C400E
Display:
Used by:
Cause: A missing or broken lead was encountered during vision processing.
Remedy: Check the lead pitch and the orientation of the part.
------------------------------
Code: 1D0C400F
Display:
Used by:
Cause: The lead pitch exceeds the permissible range.
Remedy: Check the shape of the part.
------------------------------
Code: 1D0C4010
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4011
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4012
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4016
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C4019
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401B
Display:
第 1358 页
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401C
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401D
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C401F
Display:
Used by:
Cause: There are too many leads.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4020
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4021
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0C8100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D0C8110
Display:
Used by:
第 1359 页
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D0C8111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D0C8112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D0C8113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D0C8114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D0C8115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
Code: 1D0C8120
Display:
Used by:
Cause: Qty_0 (the number of leads on the left side) in Part data has not been specified.
Remedy: Specify Qty_0.
------------------------------
Code: 1D0C8121
Display:
Used by:
Cause: Qty_1 (the number of leads on the lower side) in Part data has not been specified.
Remedy: Specify Qty_1.
------------------------------
Code: 1D0C8122
Display:
Used by:
Cause: Qty_2 (the number of leads on the right side) in Part data has not been specified.
Remedy: Specify Qty_2.
------------------------------
第 1360 页