FUJI错误代码查询.pdf - 第1263页
Used by: Cause: Part data's Body-Size is 0. Remedy: Check Part data. ------------------------------ Code: 1D030005 Display: 0005 Used by: Cause: Part data's lead width is 0. Remedy: Check Part data. -----------…
Display:
Used by:
Cause: An edge could not be detected on the upper side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D02D000
Display:
Used by:
Cause: The part pickup slippage was too large (X direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D02D080
Display:
Used by:
Cause: The part pickup slippage was too large (Y direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D02E???
Display:
Used by:
Cause: The image in vision processing is not correct so operation was canceled.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D02F???
Display:
Used by:
Cause: There was a logical error in the management program.
Remedy: Check Part data.
------------------------------
Code: 1D030001
Display:
Used by:
Cause: Some necessary data is not included in Part data.
Remedy: Enter all the necessary data.
------------------------------
Code: 1D030002
Display:
Used by:
Cause: Parts cannot be picked.
Remedy: Replenish the part supply.
------------------------------
Code: 1D030003
Display:
Used by:
Cause: The part surface cannot be detected.
Remedy: Set the part X axis offset and pick the part.
------------------------------
Code: 1D030004
Display: 0004
第 1262 页
Used by:
Cause: Part data's Body-Size is 0.
Remedy: Check Part data.
------------------------------
Code: 1D030005
Display: 0005
Used by:
Cause: Part data's lead width is 0.
Remedy: Check Part data.
------------------------------
Code: 1D030006
Display: 0006
Used by:
Cause: Part data's Pitch is 0.
Remedy: Check Part data.
------------------------------
Code: 1D030007
Display:
Used by:
Cause: The part's upper or lower area cannot be found. The part is too long in the Y direction.
Remedy: Check the picking conditions. Check the part size.
------------------------------
Code: 1D030008
Display:
Used by:
Cause: The part is too short in the Y direction. The part's angle of tilt is too large.
Remedy: Check the part size. Check the picking conditions.
------------------------------
Code: 1D03000A
Display: 0010
Used by:
Cause: There is no bright area on the right.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D03000B
Display: 0012
Used by:
Cause: The unevenness on the right is too large.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D03000D
Display: 0014
Used by:
Cause: The part shape is not what was expected. Vision processing cannot take a good image.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D03000F
Display: 0015
Used by:
Cause: The part shape is not what was expected. Vision processing cannot take a good image.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
第 1263 页
------------------------------
Code: 1D030010
Display: 0016
Used by:
Cause: The part is too short in the Y direction.
Remedy: Check that the nozzle is not dirty, that there are no foreign particles on the part, and that the
correct part is being analyzed.
------------------------------
Code: 1D030011
Display: 0017
Used by:
Cause: The part is too long in the Y direction.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D030012
Display: 0018
Used by:
Cause: The part shape is not what was expected. Vision processing cannot take a good image.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D030013
Display: 0019
Used by:
Cause: The part shape is not what was expected. Vision processing cannot take a good image.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D030014
Display: 0020
Used by:
Cause: The upper right hand corner lead cannot be found.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D030015
Display: 0021
Used by:
Cause: The lower right hand corner lead cannot be found.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D030016
Display:
Used by:
Cause: The upper area lead cannot be found. The tilt of the part was too large.
Remedy: Check the shape of the part. Check that the part is being picked properly.
------------------------------
Code: 1D030017
Display:
Used by:
Cause: The lower area lead cannot be found. The tilt of the part was too large.
Remedy: Check the shape of the part. Check that the part is being picked properly.
------------------------------
Code: 1D030080
第 1264 页