FUJI错误代码查询.pdf - 第2184页

Remedy: Check the partial data setting. ------------------------------ Code: 51??0011 Display: Read level setting is incorrect. Used by: Cause: There is an error in the read level setting specified in the command line. R…

100%1 / 5282
Used by:
Cause: The nickname is incorrect.
Remedy: Check the specified nickname.
------------------------------
Code: 51??0003
Display: Either the file name or path name is too long.
Used by:
Cause: File names may be up to 23 characters and path names may be up to 127 characters.
Remedy: Check the specified file and path names.
------------------------------
Code: 51??0004
Display: The file name is incorrect.
Used by:
Cause: The specified file name is incorrect.
Remedy: Check the specified file name.
------------------------------
Code: 51??0005
Display: Machine not supported.
Used by:
Cause: Either the machine type or the command is not supported.
Remedy: Check the specified nickname and machine type.
------------------------------
Code: 51??0006
Display: Revision not supported.
Used by:
Cause: The revision cannot be supported by the machine or a mistake has been made in specifying the
revision.
Remedy: Check how the revision was specified.
------------------------------
Code: 51??0007
Display: Specified revision does not exist.
Used by:
Cause: This revision does not exist in the machine.
Remedy:
------------------------------
Code: 51??0008
Display: Specified job number is out of range.
Used by:
Cause: The job number specified in the command line is incorrect.
Remedy: Check the specified job number.
------------------------------
Code: 51??0009
Display: Specified job does not exist.
Used by:
Cause: The job specified by the nickname and job number does not exist.
Remedy:
------------------------------
Code: 51??0010
Display: Partial data setting is incorrect.
Used by:
Cause: There is an error in the partial data setting specified in the command line.
第 2183 页
Remedy: Check the partial data setting.
------------------------------
Code: 51??0011
Display: Read level setting is incorrect.
Used by:
Cause: There is an error in the read level setting specified in the command line.
Remedy: Check the read level setting.
------------------------------
Code: 51??0012
Display: The file type setting is incorrect.
Used by:
Cause: There is an error in the file type setting specified in the command line.
Remedy: Check the file type setting.
------------------------------
Code: 51??0013
Display: The host name setting is incorrect.
Used by:
Cause: There is an error in the host name specified in the command line.
Remedy: Check the host name setting.
------------------------------
Code: 51??0014
Display: The block number setting is incorrect.
Used by:
Cause: There is an error in the block number specified in the command line.
Remedy: Check the block number setting.
------------------------------
Code: 51??0015
Display: The line configuration setting is incorrect.
Used by:
Cause: There is an error in the line configuration specified in the command line.
Remedy: Check the line configuration setting.
------------------------------
Code: 51??0020
Display: File format error.
Used by:
Cause: There is a mistake in the format of the production program file, the pallet data file, the partial
data file, the Proper data file or the status data file.
Remedy: Check and correct the file format. Supplementary data may be displayed which will indicate the
approximate location of the error.
------------------------------
Code: 51??0021
Display: Arrived at EOF.
Used by:
Cause: A file was read and an EOF was detected at a location where it was not expected.
Remedy: Check and correct the contents of the file.
------------------------------
Code: 51??0022
Display: File already exists.
Used by:
Cause: The specified file already exists.
Remedy: Check the specified file name. If the file can be overwritten, specify the overwrite command and
第 2184 页
perform the operation again.
------------------------------
Code: 51??0023
Display: File does not exist.
Used by:
Cause: The specified file does not exist.
Remedy: Check the specified file name. Alternatively copy or create the file in the directory.
------------------------------
Code: 51??0024
Display: File in exclusive hold.
Used by:
Cause: The specified file is being used exclusively.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0025
Display: File is not held.
Used by:
Cause: The specified file is not held or it has already been released.
Remedy: Check the setting made for the "release" file name.
------------------------------
Code: 51??0026
Display: File hold time-out error has occurred.
Used by:
Cause: The specified file is being used exclusively and a time-out error occurred while waiting to acquire
it.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0027
Display: File cannot be accessed.
Used by:
Cause: Accessing the specified file is not permitted.
Remedy:
------------------------------
Code: 51??0028
Display: File cannot be opened.
Used by:
Cause: The specified file cannot be opened.
Remedy:
------------------------------
Code: 51??0029
Display: File cannot be read.
Used by:
Cause: An error occurred when the specified file was read. This is believed to be an I/O error.
Remedy:
------------------------------
Code: 51??0030
Display: File cannot be written to.
Used by:
Cause: An error occurred when the specified file was written to. This is believed to be an I/O error.
Remedy:
------------------------------
第 2185 页