FUJI错误代码查询.pdf - 第2065页
Display: Help task fork error Used by: Cause: Either the help task does not exist or it cannot be started. Remedy: Re-install the system. ------------------------------ Code: 2100CA11 Display: Err_disp task fork error Us…
------------------------------
Code: 2100CA08
Display: Directory make error
Used by:
Cause: The directory cannot be made on the destination drive.
Remedy: Check the capacity of the destination drive.
------------------------------
Code: 2100CA09
Display: Path error
Used by:
Cause: A file which is not a production program or a file which is not in the Fuji format is included
among the files being copied.
Remedy: Check the files.
------------------------------
Code: 2100CA0A
Display: Device error
Used by:
Cause: The device specified in the destination file does not exist.
Remedy: Check the destination file.
------------------------------
Code: 2100CA0B
Display: Seek Error
Used by:
Cause: The destination media is faulty. Either the disk is not formatted or the disk is damaged.
Remedy: Replace the floppy disk or media.
------------------------------
Code: 2100CA0C
Display: Version error
Used by:
Cause: The environment file is incorrect.
Remedy: Re-install the system.
------------------------------
Code: 2100CA0D
Display: No support M/C type
Used by:
Cause: A production program for an unsupported machine type was copied.
Remedy: Upgrade to a version of the MCS software which supports the specified machine type.
------------------------------
Code: 2100CA0E
Display: Reference copy error
Used by:
Cause: Copying cannot be performed because, for example, the destination file is write protected.
Remedy: Clear the write protect.
------------------------------
Code: 2100CA0F
Display: LS fork error
Used by:
Cause: Either the LS task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA10
第 2064 页
Display: Help task fork error
Used by:
Cause: Either the help task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA11
Display: Err_disp task fork error
Used by:
Cause: Either an error display task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA12
Display: Memory full
Used by:
Cause: The memory is full.
Remedy: After completing the present operation, reduce the number of files to be copied.
------------------------------
Code: 2100CA13
Display: Directory open error
Used by:
Cause: The directory does not exist.
Remedy: Ensure that the path specified in the input program is correct.
------------------------------
Code: 2100CA14
Display:
Used by:
Cause: Presently not supported.
Remedy:
------------------------------
Code: 2100CA15
Display: Nozzle data empty
Used by:
Cause: The name of the nozzle assignment table has not been entered in the specified production
program.
Remedy: Specify the name of the nozzle assignment table in the production program.
------------------------------
Code: 2100CA16
Display: Environment file open error
Used by:
Cause: The environment file does not exist.
Remedy: Re-install the system.
------------------------------
Code: 2100CA17
Display: Environment file read error
Used by:
Cause: The environment file has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 2100CA18
Display: Sample file create error
Used by:
第 2065 页
Cause: Either there is no work directory or there is insufficient RAM.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA19
Display: Sample file open error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1A
Display: Sample file read error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1B
Display: Sample file write error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1C
Display: Header read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1D
Display: Offset read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1E
Display: Program file open error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1F
Display: Program file read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA20
Display: PD file open error
第 2066 页