FUJI错误代码查询.pdf - 第2302页

Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in B mark. Used by: Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", &…

100%1 / 5282
------------------------------
Code: 52??1356
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the F mark data file.
Used by:
Cause: The F mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the F mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the F mark data file which is
referred to in the production program.
------------------------------
Code: 52??1357
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the B mark data file.
Used by:
Cause: The B mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the B mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the B mark data file which is
referred to in the production program.
------------------------------
Code: 52??1358
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the M mark data file.
Used by:
Cause: The M mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the M mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the M mark data file which is
referred to in the production program.
------------------------------
Code: 52??1359
Display: Format error in "UNIT", "MARK" - "BLOCK", "MARKDT-"in the G mark data file.
Used by:
Cause: The G mark data file referred to in the specified production program was read and a format error
was detected in "BLOCK", "MARKDT-" in "UNIT", "MARK". This report is made when the mark data and
production program are in different files, the G mark data is required in the applicable machine type and
the above error is detected.
Remedy: Check the "UNIT", "MARK" - "BLOCK", "MARKDT-" setting in the G mark data file which is
referred to in the production program.
------------------------------
Code: 52??1400
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in F mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in F
mark was not found. This report is made when the mark data and production program are in the same
file, the F mark data is required in the applicable machine type and the above error is detected. When
downloading, the F mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1401
第 2301 页
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in B mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in B
mark was not found. This report is made when the mark data and production program are in the same
file, the B mark data is required in the applicable machine type and the above error is detected. When
downloading, the B mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1402
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in M mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in M
mark was not found. This report is made when the mark data and production program are in the same
file, the M mark data is required in the applicable machine type and the above error is detected. When
downloading, the M mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1403
Display: No "BLOCK", "MARKDT-" in "UNIT", "MARK" in G mark.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" in G
mark was not found. This report is made when the mark data and production program are in the same
file, the G mark data is required in the applicable machine type and the above error is detected. When
downloading, the G mark data is set to its default values.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1404
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for F mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the F
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the F mark is not multiply defined.
------------------------------
Code: 52??1405
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for B mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the B
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the B mark is not multiply defined.
------------------------------
Code: 52??1406
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for M mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the M
mark was multiply defined. This report is made when the mark data and production program are in the
第 2302 页
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the M mark is not multiply defined.
------------------------------
Code: 52??1407
Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" for G mark is multiply defined.
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT" for the G
mark was multiply defined. This report is made when the mark data and production program are in the
same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" to appear is
taken as the valid one.
Remedy: At the "MARKTYPE" setting in "UNIT", "MARK" - "BLOCK", "HEADER-" in the production
program, check that the G mark is not multiply defined.
------------------------------
Code: 52??1408
Display: Format error in F mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
F mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1409
Display: Format error in B mark's "UNIT", "MARK" - "BLOCK" MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
B mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1410
Display: Format error in M mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
M mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1411
Display: Format error in G mark's "UNIT", "MARK" - "BLOCK", "MARKDT-".
Used by:
Cause: "UNIT", "MARK" in the specified production program was read and a format error was detected in
G mark's "BLOCK", "MARKDT-". This report is made when the mark data and production program are in
the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the production program.
------------------------------
Code: 52??1500
Display: No nozzle data file.
Used by:
Cause: The nozzle data file referred to in the specified production program was not found. This report is
第 2303 页