FUJI错误代码查询.pdf - 第2050页

Display: Merge work file write error Used by: Cause: The work file for combining the Eval files could not be written to. Remedy: After completing the present operation, re-execute the file. Do not combine files which exc…

100%1 / 5282
Remedy: At the UCI screen, re-execute the file. If this does not work, execute the file after completing the
operation presently being executed. If this does not work, reboot the MCS. Do not combine files which
exceed the Fuji specified file size.
------------------------------
Code: 2100B530
Display: Offset table work file open error
Used by:
Cause: An error occurred when opening the work file for generating the offset table.
Remedy: At the UCI screen, re-execute the file.
------------------------------
Code: 2100B531
Display: Offset table work file read error
Used by:
Cause: Data could not be read from the work file for generating the offset table.
Remedy: At the UCI screen, re-execute the file.
------------------------------
Code: 2100B532
Display: Offset table work file write error
Used by:
Cause: Data could not be written to the work file for generating the offset table.
Remedy: After completing the present operation, re-execute the file. If this does not work, reboot the
MCS. Do not combine files which exceed the Fuji specified file size.
------------------------------
Code: 2100B533
Display: Eval file copying error
Used by:
Cause: The file for combining Eval files created in RAM could not be copied under the specified name.
Remedy: Erase any unnecessary files on the specified output disk and re-execute the log file again.
------------------------------
Code: 2100B534
Display: When Eval file were merged,memory space could not be allocated
Used by:
Cause: When combining EVAL files, the necessary memory could not be secured.
Remedy: After completing the present operation, re-execute the file. If this does not work, reboot the
MCS. Do not combine files which exceed the Fuji specified file size.
------------------------------
Code: 2100B535
Display: Merge work file create error
Used by:
Cause: The work file for combining the Eval files could not be created.
Remedy: Re-execute the file at the UCI screen. If this does not work, re-execute the file after completing
the operation presently being executed. If this does not work, reboot the MCS. Do not combine files
which exceed the Fuji specified file size.
------------------------------
Code: 2100B536
Display: Merge work file open error
Used by:
Cause: An error occurred when the work file for combining the Eval files was opened.
Remedy: Re-execute the file at the UCI screen.
------------------------------
Code: 2100B537
第 2049 页
Display: Merge work file write error
Used by:
Cause: The work file for combining the Eval files could not be written to.
Remedy: After completing the present operation, re-execute the file. Do not combine files which exceed
the Fuji specified file size.
------------------------------
Code: 2100B5F0
Display: Eval_conv start format is differenct.
Used by:
Cause: The Eval_conv start format is wrong.
Remedy: Re-execute the Eval_conv after correcting the Eval_conv start format.
------------------------------
Code: 2100B5F1
Display: Input file not found.
Used by:
Cause: When Eval_conv was started, the specified input file could not be found.
Remedy: Re-execute Eval_conv after ensuring that the specified input file exists.
------------------------------
Code: 2100B5F2
Display: Message file read error.
Used by:
Cause: The message file cannot be expanded.
Remedy: Re-install the system.
------------------------------
Code: 2100B5F3
Display: Memory allocation error.
Used by:
Cause: The memory field could not be secured.
Remedy: After completing the present operation, execute Eval_conv again. If this does not work, reboot
the MCS.
------------------------------
Code: 2100B5F4
Display: Input file open error.
Used by:
Cause: The input file could not be opened.
Remedy: Ensure that the input file has not been corrupted.
------------------------------
Code: 2100B5F5
Display: Input file read error.
Used by:
Cause: The input file could not be read.
Remedy: Ensure that the input file has not been corrupted.
------------------------------
Code: 2100B5F6
Display: Offset table file create error.
Used by:
Cause: An error occurred when the file for generating the offset table was created.
Remedy: After completing the present operation, execute Eval_conv again. If this does not work, reboot
the MCS.
------------------------------
Code: 2100B5F7
第 2050 页
Display: Offset table file open error.
Used by:
Cause: An error occurred when the work file for generating the offset table was opened.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5F8
Display: Offset table file read error.
Used by:
Cause: Data could not be read from the file for generating the offset table.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5F9
Display: Offset table file write error.
Used by:
Cause: Data could not be written to the file for generating the offset table.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FA
Display: Work distination file create error.
Used by:
Cause: The work file for Eval file conversion could not be created.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FB
Display: Work distination file open error.
Used by:
Cause: An error occurred when the work file for Eval file conversion was opened.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5FC
Display: Work distination file write error.
Used by:
Cause: The work file for Eval file conversion could not be written to.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FD
Display: Distination file copying error.
Used by:
Cause: Data could not be copied to the output file from the file for Eval file conversion.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100BF00
Display: Environment file read error
Used by:
Cause: Unable to read the environment file.
Remedy: Check the log_file_size heading in the environment file.
------------------------------
Code: 2100BF01
第 2051 页