FUJI错误代码查询.pdf - 第2069页
Used by: Cause: The message file could not be loaded. Remedy: Re-install the software. ------------------------------ Code: 2100E006 Display: keyboard error Used by: Cause: An error occurred during input from the keyboar…
Used by:
Cause: The specified input and output drive are the same.
Remedy: Check the specified drives.
------------------------------
Code: 2100CA29
Display: Media full
Used by:
Cause: The output disk capacity is insufficient.
Remedy: When the output destination is a floppy drive, replace the disk as per the message instructions.
When the output destination is the hard drive, cancel the copy function and secure the needed amount of
memory by erasing any unnecessary files.
------------------------------
Code: 2100DA09
Display: can't load proper file on memory
Used by:
Cause: The specified file could not be loaded into memory.
Remedy: Re-boot MCS. If the error recurs, re-install the system.
------------------------------
Code: 2100E000
Display: Illegal parameter
Used by:
Cause: The start-up command does not contain the correct number of parameters.
Remedy: Correct the parameters if the error occurred when starting up with a direct command.
------------------------------
Code: 2100E001
Display: Illegal parameter
Used by:
Cause: The start-up parameters are incorrect.
Remedy: Correct the input parameters if this error occurred when starting up with a direct command.
------------------------------
Code: 2100E002
Display: Illegal language option
Used by:
Cause: The display language was not specified correctly.
Remedy: Correct the input option if this error occurred when starting up with a direct command.
------------------------------
Code: 2100E003
Display: Illegal terminal option
Used by:
Cause: The terminal number was not specified correctly in the start-up command.
Remedy: Correct the input terminal number if this error occurred when starting up with a direct
command.
------------------------------
Code: 2100E004
Display: Run Level Check error
Used by:
Cause: The Run Level of the start-up command is incorrect.
Remedy: Correct the input Run Level if this error occurred when starting up with a direct command.
------------------------------
Code: 2100E005
Display: Strings file load error
第 2068 页
Used by:
Cause: The message file could not be loaded.
Remedy: Re-install the software.
------------------------------
Code: 2100E006
Display: keyboard error
Used by:
Cause: An error occurred during input from the keyboard.
Remedy: Check that the cable is connected properly.
------------------------------
Code: 2100E007
Display: event link error
Used by:
Cause: An event could not be linked.
Remedy: Contact Fuji.
------------------------------
Code: 2100E008
Display: request print stop event set error
Used by:
Cause: The print stop request event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E011
Display: Device check error
Used by:
Cause: An error occurred when checking for empty space on the disk.
Remedy: Check that /H0 or /D0 is correctly specified.
------------------------------
Code: 2100E013
Display: err_disp error
Used by:
Cause: An error occurred when displaying another error.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E014
Display: Device not ready
Used by:
Cause: The specified device (floppy disk drive or printer) is not operational.
Remedy: Make sure that the floppy disk drive lock lever is fully closed or that the printer is turned on and
set on-line.
------------------------------
Code: 2100E100
Display: option file not found
Used by:
Cause: The option file does not exist.
Remedy: Re-install the software.
------------------------------
Code: 2100E102
Display: print file can't be created
Used by:
Cause: The print file could not be created.
第 2069 页
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100E103
Display: Print file write error
Used by:
Cause: Print data could not be written to the print file.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100E120
Display: install_list transfer error
Used by:
Cause: The install list could not be installed.
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E121
Display: key file transfer error
Used by:
Cause: The key file could not be installed.
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E122
Display: install list open error
Used by:
Cause: The install list could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E124
Display: key file open error
Used by:
Cause: The key file could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E126
Display: directory file open error
Used by:
Cause: The directory file could not be opened (Mode : 0020).
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E127
Display: opt file updatefailed
Used by:
Cause: The option file could not be updated.
Remedy: Re-execute the function. If the error recurs, re-boot MCS. If the error continues to recur,
contact Fuji.
------------------------------
Code: 2100E128
第 2070 页