FUJI错误代码查询.pdf - 第1165页

Remedy: Check to see if the wrong feeder was designated as the verify request subject. Or, set the subject feeder on the PFU, establish an association, then repeat the verify request. ------------------------------ Code:…

Code: 180100F3

Display: ERRCODE: 0x180100F3

Used by: Handy terminal (QP132)

Cause: Error in received command data. (For example, the Device Status data exceeded the prescribed

range.)

Remedy: The wrong software version is being used at the machine and handy terminal. Use the correct

version.

------------------------------

Code: 180100F4

Display: ERRCODE: 0x180100F4

Used by: Handy terminal (QP132)

Cause: Machine version information is incorrect. The MVRP, MVRM machine software version number is

other than "0".

Remedy: The wrong software version is being used at the machine and handy terminal. Use the correct

version.

------------------------------

Code: 180100F5

Display: ERRCODE: 0x180100F5

Used by: Handy terminal (QP132)

Cause: Communication time out. A reply was not received within the specified time period.

Remedy: Verify that the machine power is ON and that machine connections are correct, then press the

[ENTER] key.

------------------------------

Code: 180100F6

Display: ERRCODE: 0x180100F6

Used by: Handy terminal (QP132)

Cause: Port control error. An error report was received from a device during COM port control (writing,

reading, etc.).

Remedy: Restart the machine and the Handy terminal.

------------------------------

Code: 180100F7

Display: ERRCODE: 0x180100F7

Used by: Handy terminal (QP132)

Cause: An inappropriate (invalid) reply was received. (For example, "VSRP" was transmitted, but a

"VCEP" reply was received.)

Remedy: Restart the machine and the Handy terminal.

------------------------------

Code: 180100F8

Display: ERRCODE: 0x180100F8

Used by: Handy terminal (QP132)

Cause: Incorrect Machine type. The MVRP and MVRM machine software version is other than "0x00 to

0x02".

Remedy: The wrong software version is being used at the machine and handy terminal. Use the correct

version.

------------------------------

Code: 18010101

Display: HT err:****

Used by: QP132

Cause: The verify request (including splicing check) subject FIDL (feeder information) does not exist in

the machine's PFU data.

"****" is the command name.

第 1164 页

Remedy: Check to see if the wrong feeder was designated as the verify request subject. Or, set the subject

feeder on the PFU, establish an association, then repeat the verify request.

------------------------------

Code: 18010102

Display: HT err:****

Used by: QP132

Cause: The HT report initiated by a verify request (including splicing check) contains the wrong FIDL.

"****" is the command name.

Remedy: Check to see if the wrong feeder was designated as the verify request subject. Or, set the subject

feeder on the PFU, establish an association, then repeat the verify request.

------------------------------

Code: 18010103

Display: HT err:****

Used by: QP132

Cause: The HT report initiated by a verify request (including splicing check) contains the wrong device

comment.

"****" is the command name.

Remedy: Check whether there is an error in the stage, slot or subslot of the device subject to verification.

------------------------------

Code: 18010104

Display: HT err:****

Used by: QP132

Cause: The HT report initiated by a verify request (including splicing check) contains the wrong stage,

slot, or sub-slot.

"****" is the command name.

Remedy: Check whether there is an error in the device comment of the device subject to verification.

------------------------------

Code: 18010105

Display: HT err:**** No applicable FIDL

Used by: QP132

Cause: The HT report initiated by a verify request (including splicing check) indicates an FIDL change,

but the new FIDL (feeder information) does not exist in the machine's PFU data.

"****" is the command name.

Remedy: Check to see if the wrong feeder was specified. Or, set the subject feeder on the PFU, establish

an association, then repeat the verify request.

------------------------------

Code: 18010106

Display: None

Used by: QP132

Cause: A verify request (including splicing check) was issued before the zero setting operation was

completed. When a zero setting is carried out, the PFU power is turned ON, a continuous association is

established, and feeder information is obtained.

Remedy: Execute the verify request (including splicing check) after the zero setting operation is

completed.

------------------------------

Code: 18010107

Display: None

Used by: QP132

Cause: A verify request (including splicing check) was issued without a PFU installed.

Remedy: Execute the verify request (including splicing check) after the PFU is installed.

------------------------------

第 1165 页

Code: 18010108

Display: None

Used by: QP132

Cause: An HT association request was issued during automatic operation, etc., when an association

status is prohibited.

Remedy: Execute the HT association request when automatic operation is not in progress.

------------------------------

Code: 18010109

Display: None

Used by: QP132

Cause: An association failure occurred.

Remedy: Refer to the guidance message displayed on the machine.

------------------------------

Code: 1801011?

Display: HT err: ****

HT command handshake error

Used by: QP132

Cause: A verify report was received when a verify report (including splicing check) waiting status was not

in effect.

"****" is the command name.

"?" is the command number.

Remedy: Execute a verify request.

------------------------------

Code: 1801012A

Display: Executing HT command

HT error: 1801012A

Used by: QP132

Cause: The specified command cannot be executed.

Remedy: Check that verification processing (or splicing) are not being performed. Alternatively, cut and

resupply power to the HT.

------------------------------

Code: 1801012B

Display: HT command error

HT error: 1801012B

Used by: QP132

Cause: A verification or splicing request was issued from the machine, but the appropriate feeder cannot

be located.

Remedy: Check the feeders, and perform verification again.

------------------------------

Code: 1801012C

Display: HT command type error

HT error: 1801012C

Used by: QP132

Cause: The command issued from the HT is not supported.

Remedy: Check the command or cut and resupply power to the HT.

------------------------------

Code: 1801012D

Display: HT command time out

HT error: 1801012D

Used by: QP132

Cause: The command issued to the HT timed out.

第 1166 页