FUJI错误代码查询.pdf - 第2237页

Cause: During the search for the part data referred to in the device line in the specified production program, "UNIT", "PARTS" was read and a format error was detected in "NAME" in "BLO…

100%1 / 5282
program but the part data's "UNIT", "PARTS" was not found. Alternatively "UNIT", "PARTS" does not follow
the correct unit. This report is made when the part data and the production program are in the same file
and the above error is detected.
Remedy: Check the setting for "UNIT", "PARTS" in the production program. Check the setting for the
"UNIT" line prior to "UNIT", "PARTS". Check the setting for "NAME" in "UNIT", "PARTS" - "BLOCK",
"HEADER-". If a station number, slot number or device number is reported as supplementary
information, look for the part data name referred to in the device line and check it.
------------------------------
Code: 51??1621
Display: Multiple "UNIT", "PARTS".
Used by:
Cause: A search was made for the part data referred to in the device line in the specified production
program but the part data's "UNIT", "PARTS" was multiply defined. This report is made when the part
data and the production program are in the same file and the above error is detected. When downloading,
the first "UNIT", "PARTS" is taken as being valid.
Remedy: Check the setting for "UNIT", "PARTS" in the production program. Check the setting for "NAME"
in "UNIT", "PARTS" - "BLOCK", "HEADER-".
------------------------------
Code: 51??1622
Display: No "UNIT", "PARTS" - "BLOCK", "HEADER-".
Used by:
Cause: A search was made for the part data referred to in the device line in the specified production
program but "BLOCK", "HEADER-" was not found in "UNIT", "PARTS". This error is reported when the
part data and the production program are in the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "HEADER-" in the part data file referred to in
the production program. Check the format and input values of the part data file which was searched for
or the part data file immediately before this one.
------------------------------
Code: 51??1623
Display: Format error in "UNIT", "PARTS" - "BLOCK", "HEADER-".
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and a format error was detected in "BLOCK", "HEADER-". This report
is made when the part data and production program are in the same file and the above error is detected.
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "HEADER-" in the production program. Check
the format and input values of the part data file which was searched for or the part data file immediately
before this one.
------------------------------
Code: 51??1624
Display: No "NAME" in "UNIT", "PARTS" - "BLOCK", "HEADER-".
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and "NAME" was not found in "BLOCK", "HEADER-". This report is
made when the part data and production program are in the same file and the above error is detected.
Remedy: Check the setting for "NAME" in "UNIT", "PARTS" - "BLOCK", "HEADER-" in the production
program. Check the format and input values of the part data file which was being searched for or the part
data file immediately before this one.
------------------------------
Code: 51??1625
Display: Format error in "NAME" in "UNIT", "PARTS" - "BLOCK", "HEADER-".
Used by:
第 2236 页
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and a format error was detected in "NAME" in "BLOCK", "HEADER-".
This report is made when the part data and production program are in the same file and the above error is
detected.
Remedy: Check the setting for "NAME" in "UNIT", "PARTS" - "BLOCK", "HEADER" in the production
program. Check the format and input values of the part data file which was being searched for or the part
data file immediately before this one.
------------------------------
Code: 51??1626
Display: Format error in "GD#" in "UNIT", "PARTS" - "BLOCK", "HEADER-".
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and a format error was detected in "GD#" in "BLOCK", "HEADER-".
This report is made when the part data and production program are in the same file and the above error is
detected.
Remedy: Check the setting for "GD#" in "UNIT", "PARTS" - "BLOCK", "HEADER" in the production
program. Check the format and input values of the part data file which was being searched for or the part
data file immediately before this one.
------------------------------
Code: 51??1627
Display: No"PTPNAME"in "UNIT","PARTS"-"BLOCK","HEADER-".
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and "PTPNAME" was not found in "BLOCK", "HEADER-". This report
is made when the part data and production program are in the same file and the above error is detected.
Remedy: Check the setting for "PTPNAME" in "UNIT", "PARTS" - "BLOCK", "HEADER-" in the production
program. Also check whether"PTPNAME"is required or not. If a stage number,slot number,sub slot
number or device number is reported as supplementary information,look for the part data name reffered
to in the device line and check it.
------------------------------
Code: 51??1628
Display: Format error in"PTPNAME"in"UNIT","PARTS"-"BLOCK","HEADER-"
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and a format error was detected in"PTPNAME" in "BLOCK", "HEADER-
". This report is made when the part data and production program are in the same file and the above
error is detected.
Remedy: Check the setting for "PTPNAME" in "UNIT", "PARTS" - "BLOCK", "HEADER" in the production
program. Also check whether"PTPNAME"is required or not. If a stage number,slot number,sub slot
number or device number is reported as supplementary information,look for the part data name reffered
to in the device line and check it.
------------------------------
Code: 51??1629
Display: Format error in"PMABAR"in"UNIT","PARTS"-"BLOCK","HEADER-".
Used by:
Cause: During the search for the part data referred to in the device line in the specified production
program, "UNIT", "PARTS" was read and a format error was detected in"PMABAR" in "BLOCK", "HEADER-".
This report is made when the part data and production program are in the same file and the above error is
detected.
Remedy: Check the setting for "PMABAR" in "UNIT", "PARTS" - "BLOCK", "HEADER" in the production
program. Also check whether"PMABAR"is required or not. If a stage number,slot number,sub slot number
第 2237 页
or device number is reported as supplementary information,look for the part data name reffered to in the
device line and check it.
------------------------------
Code: 51??1630
Display: Format error in "UNIT", "PARTS" - "BLOCK", "PRTIDDT-".
Used by:
Cause: "UNIT", "PARTS" in the part data referred to in the device line, in the specified production
program, was read and a format error was detected in
"BLOCK", "PRTIDDT-".
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "PRTIDDT-" in the production program. If a
station number, slot number or device number is reported as supplementary information, look for the part
data name referred to in the device line and check it.
------------------------------
Code: 51??1631
Display: Format error in "UNIT", "PARTS" - "BLOCK", "PRTFORM-".
Used by:
Cause: "UNIT", "PARTS" in the part data referred to in the device line, in the specified production
program, was read and a format error was detected in "BLOCK", "PRTFORM-".
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "PRTFORM-" in the production program. If a
station number, slot number or device number is reported as supplementary information, look for the part
data name referred to in the device line and check it.
------------------------------
Code: 51??1632
Display: No item definition line for "UNIT", "PARTS" - "BLOCK", "PRTSID+".
Used by:
Cause: "UNIT", "PARTS" in the part data referred to in the device line, in the specified production
program, was read and the item definition line for "BLOCK", "PRTSID+" was not found.
Remedy: Check the setting for the item definition line for "UNIT", "PARTS" - "BLOCK", "PRTSID+" in the
production program. If a station number, slot number or device number is reported as supplementary
information, look for the part data name referred to in the device line and check it.
------------------------------
Code: 51??1633
Display: "UNIT", "PARTS" - "BLOCK", "PRTSID+" format error.
Used by:
Cause: "UNIT", "PARTS" in the part data referred to in the device line, in the specified production
program, was read and a format error was detected in "BLOCK", "PRTSID+".
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "PRTSID+" in the production program. If a
station number, slot number or device number is reported as supplementary information, look for the part
data name referred to in the device line and check it.
------------------------------
Code: 51??1634
Display: "UNIT", "PARTS" - "BLOCK", "VISION-" format error.
Used by:
Cause: "UNIT", "PARTS" in the part data referred to in the device line, in the specified production
program, was read and a format error was detected in "BLOCK", "VISION-".
Remedy: Check the setting for "UNIT", "PARTS" - "BLOCK", "VISION-" in the production program. If a
station number, slot number or device number is reported as supplementary information, look for the part
data name referred to in the device line and check it.
------------------------------
Code: 51??1635
Display: "UNIT", "PARTS" - "BLOCK", "CARRING-" format error.
第 2238 页