FUJI错误代码查询.pdf - 第1344页

Used by: Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too uneven. There is foreign matter stuck to the part. Remedy: Check the camera, vision processing board, cabl…

100%1 / 5282
------------------------------
Code: 1D0B400B
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B400C
Display:
Used by:
Cause: The lead is too long.
Remedy: Check the part size, and check that the vision processing system is working correctly (check the
image).
------------------------------
Code: 1D0B400E
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B400F
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4010
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4011
Display:
Used by:
Cause: The shape of the lead cannot be checked.
Remedy: Check that the vision processing system is working correctly (check the image), and check the
lead length.
------------------------------
Code: 1D0B4012
Display:
Used by:
Cause: The part is tilted too much.
Remedy: Check that the CCD level and vision processing is operating normally.
------------------------------
Code: 1D0B4014
Display:
第 1343 页
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4015
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4016
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B4017
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D0B8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0B8100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D0B8110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D0B8111
第 1344 页
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D0B8112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D0B8113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D0B8114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D0B8115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
Code: 1D0B8120
Display:
Used by:
Cause: Qty_0 (the number of leads on the left side) in Part data has not been specified.
Remedy: Specify Qty_0.
------------------------------
Code: 1D0B8121
Display:
Used by:
Cause: Qty_1 (the number of leads on the lower side) in Part data has not been specified.
Remedy: Specify Qty_1.
------------------------------
Code: 1D0B8122
Display:
Used by:
Cause: Qty_2 (the number of leads on the right side) in Part data has not been specified.
Remedy: Specify Qty_2.
------------------------------
Code: 1D0B8123
Display:
Used by:
Cause: Qty_3 (the number of leads on the upper side) in Part data has not been specified.
第 1345 页