FUJI错误代码查询.pdf - 第1863页

Used by: Cause: There was a system error. Remedy: Re-boot MCS. ------------------------------ Code: 21002201 Display: Parameter syntax error Used by: Cause: The startup parameters were wrong. Remedy: Re-install the syste…

100%1 / 5282
Code: 21002102
Display: Filename is protected
Used by:
Cause: The filename is protected.
Remedy: Check the file.
------------------------------
Code: 21002103
Display: Filename is required
Used by:
Cause: The filename was not input.
Remedy: Input the filename.
------------------------------
Code: 21002104
Display: Discripter format error
Used by:
Cause: The descriptor format is incorrect.
Remedy: Re-install the descriptor.
------------------------------
Code: 21002105
Display: Cannot memory allocate
Used by:
Cause: Cannot allocate memory
Remedy: If something is being executed in the background, wait until this is finished. If not, re-boot
MCS.
------------------------------
Code: 21002106
Display: Gd file format error
Used by:
Cause: The GD file format is incorrect.
Remedy: Delete the file and re-create it.
------------------------------
Code: 21002107
Display: Discripter not found
Used by:
Cause: The descriptor was not found.
Remedy: Re-install the system.
------------------------------
Code: 21002108
Display: Message file not found
Used by:
Cause: The message file was not found.
Remedy: Re-install the system.
------------------------------
Code: 21002109
Display: Logical error
Used by:
Cause: There was a logical error.
Remedy: Re-boot MCS.
------------------------------
Code: 21002110
Display: I/O error
第 1862 页
Used by:
Cause: There was a system error.
Remedy: Re-boot MCS.
------------------------------
Code: 21002201
Display: Parameter syntax error
Used by:
Cause: The startup parameters were wrong.
Remedy: Re-install the system.
------------------------------
Code: 21002202
Display: Environment File open error
Used by:
Cause: Unable to open the ID file.
Remedy: After entering ":/h0/cmds/del/ h0/mcs2/.sys/idt" from the UCI menu, input ":idg -a".
------------------------------
Code: 21002203
Display: Instance_ID data error (ERROR)
Used by:
Cause: There was no ID number.
Remedy: Input ":idg -a" from the UCI menu.
------------------------------
Code: 21002204
Display: File not found.
Used by:
Cause: The file was not found.
Remedy: Check the input filename.
------------------------------
Code: 21002205
Display: Instance_ID data error (WARNING)
Used by:
Cause: The ID number could not be found.
Remedy: Input ":idg -a" at the UCI menu.
------------------------------
Code: 21003A03
Display: can't get err_file event
Used by:
Cause: A console event could not be set.
Remedy: Start up from the UCI menu.
------------------------------
Code: 21003A04
Display: can't find error file
Used by:
Cause: The error file does not exist.
Remedy: There was no error. If an error occurs an error file will be automatically created.
------------------------------
Code: 21003A05
Display: can't open error file
Used by:
Cause: The error file could not be opened.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
第 1863 页
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A06
Display: can't read error file
Used by:
Cause: The error file could not be read.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A07
Display: 21003A07
Used by:
Cause: There is no error data in the error file.
Remedy: None.
------------------------------
Code: 21003A08
Display: can't delete temp_file (delete)
Used by:
Cause: A temporary file could not be deleted.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A09
Display: can't allocate memory
Used by:
Cause: Not possible to allocate sufficient memory area.
Remedy: If something is being executed in the background, wait until this is finished. If not, re-boot
MCS.
------------------------------
Code: 21003A0A
Display: can't open err_file (delete)
line disclipta open error
Used by:
Cause: The error file could not be opened.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A0B
Display: can't read err_file (delete)
Used by:
Cause: The error file could not be read.
Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error
file. Use the following commands: ":/h0/cmds/del /h0/work_0/err/err_file".
------------------------------
Code: 21003A0C
Display: can't get err_file event (delete)
Used by:
Cause: An error event could not be set.
Remedy: Re-boot MCS.
------------------------------
Code: 21003A0D
Display: can't delete err_file (delete)
第 1864 页