FUJI错误代码查询.pdf - 第1415页

Part data. Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used. ------------------------------ Code: 1D114041 Display: Used by: Cause: The image is not set (the nozzle is …

------------------------------

Code: 1D10C6??

Display:

Used by:

Cause: An edge could not be detected on the right side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D10C7??

Display:

Used by:

Cause: An edge could not be detected on the upper side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D10D000

Display:

Used by:

Cause: The part pickup slippage was too large (X direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D10D080

Display:

Used by:

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D10E???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D10F???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D110002

Display:

Used by:

Cause: The part cannot be picked.

Remedy: Replenish the part supply.

------------------------------

Code: 1D114006

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

第 1414 页

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D114041

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D114042

Display:

Used by:

Cause: The Part data body size is too large compared to the part.

Remedy: Check Part data. Alternately, check whether the nozzle is dirty, there is foreign matter on the

parts, or the wrong parts are being used.

------------------------------

Code: 1D114043

Display:

Used by:

Cause: The Part data body size is too small compared to the part.

Remedy: Check Part data. Alternately, check whether the nozzle is dirty, there is foreign matter on the

parts, or the wrong parts are being used.

------------------------------

Code: 1D114044

Display:

Used by:

Cause: The size of the part differs from the value in Part data by more than +-10%.

Remedy: Check Part data. Alternately, check whether the nozzle is dirty, there is foreign matter on the

parts, or the wrong parts are being used.

------------------------------

Code: 1D114045

Display:

Used by:

Cause: The part is tilted more than +-15 deg. or the part length is wrong.

Remedy: Check Part data. Alternately, check whether the nozzle is dirty, there is foreign matter on the

parts, or the wrong parts are being used.

------------------------------

Code: 1D114046

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D114047

Display:

Used by:

Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-

第 1415 页

shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in

Part data.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D114048

Display:

Used by:

Cause: The lead could not be found.

Remedy: Check the part shape and Part data.

------------------------------

Code: 1D114049

Display:

Used by:

Cause: The lead pitch is outside the accepted range.

Remedy: Check the shape of the part.

------------------------------

Code: 1D11404A

Display:

Used by:

Cause: The part could not be found. The part shape could not be detected.

Remedy: Check Part data and check that the part is being picked correctly. Check that vision processing

is taking the image correctly.

------------------------------

Code: 1D11404B

Display:

Used by:

Cause: The lead could not be found.

Remedy: Check that the image produces the correct lead length and width.

------------------------------

Code: 1D11404C

Display:

Used by:

Cause: The tilt of the part exceeds 15 deg.. The four areas are not uniform in tilt.

Remedy: Check that the part is being picked correctly, and check the part shape.

------------------------------

Code: 1D118002

Display:

Used by:

Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not

detect any part.

Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower

the CCD level so that parts can be detected.

------------------------------

Code: 1D118100

Display:

Used by:

Cause: This Computer Vision No. is not supported.

Remedy: Check the Computer Vision No. in Part Data.

------------------------------

Code: 1D118110

Display:

第 1416 页