FUJI错误代码查询.pdf - 第1857页
Remedy: Connect before transmission. ------------------------------ Code: 21001B00 Display: Input file not found Used by: Cause: The input file does not exist. Remedy: Check the input file name. -------------------------…
Display: Data out of range
Used by:
Cause: A downloaded data value lies outside the permissible range of values.
Remedy: Correct the download program.
------------------------------
Code: 21001814
Display: Data area is full
Used by:
Cause: The number of multi-entry data items exceeds the fixed limit.
Remedy: Correct the download program.
------------------------------
Code: 21001831
Display: Illegal format 'DATA'
Used by:
Cause: The format of the data is incorrect.
Remedy: Correct the download program.
------------------------------
Code: 21001832
Display: Data block name error
Used by:
Cause: The specified data block name does not exist in the File Descriptor.
Remedy: Correct the download program.
------------------------------
Code: 21001833
Display: Data name error
Used by:
Cause: The specified data name does not exist in the File Descriptor.
Remedy: Correct the download program.
------------------------------
Code: 21001834
Display: Number of data over
Used by:
Cause: The number of multi-entry data names or lines exceeds the limit of 150.
Remedy: Correct the download program.
------------------------------
Code: 21001835
Display: Parentheses placement error
Used by:
Cause: The positions of the parentheses "(" or ")" is incorrect.
Remedy: Correct the download program.
------------------------------
Code: 21001836
Display: Illegal data
Used by:
Cause: An illegal data structure or excess data was found in the download program.
Remedy: Correct the download program.
------------------------------
Code: 21001900
Display:
Used by:
Cause: A transmission request was received after disconnection or before connection.
第 1856 页
Remedy: Connect before transmission.
------------------------------
Code: 21001B00
Display: Input file not found
Used by:
Cause: The input file does not exist.
Remedy: Check the input file name.
------------------------------
Code: 21001B01
Display: Illegal device
Used by:
Cause: An "A1" input device was specified
Remedy: Check the input device.
------------------------------
Code: 21001B02
Display: Output file already exist
Used by:
Cause: An output file of the same name exists.
Remedy: Either change the name of the output file or select overwrite.
------------------------------
Code: 21001B03
Display: Output file open error
Used by:
Cause: The output file cannot be opened. 1) An output file name is specified when multiple input files
have been selected. 2) The output file is write protected.
Remedy: 1) Check the output file name. 2) Either change the output file name or clear the write protect.
------------------------------
Code: 21001B04
Display: No entry Machine type
Used by:
Cause: The machine type was not specified.
Remedy: Specify the machine type.
------------------------------
Code: 21001B05
Display: Device not ready
Used by:
Cause: The device is not ready for operation.
Remedy: Check the output device.
------------------------------
Code: 21001C00
Display: Program file open error
Used by:
Cause: One of the following errors exists in the specified production program. The specified production
program does not exist or the specified file name is the directory name or write protect has been set for the
specified file.
Remedy: Check the production program name, specify the correct file name, and try operation again. If
the production program is write protected, re-execute the command after releasing the write protect.
------------------------------
Code: 21001C01
Display: PTN file open error
Used by:
第 1857 页
Cause: One of the following errors exists in the specified PTN file (GSP5 pattern file). The specified PTN
file does not exist or the specified file name is the directory name.
Remedy: Check the PTN file. Specify the correct file name, and resume operation.
------------------------------
Code: 21001C02
Display: Program file not found
Used by:
Cause: The specified production program name is not the name of the production program file.
Remedy: Check the production program name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C03
Display: PTN file not found
Used by:
Cause: The specified PTN file (GSP5 pattern file) is not the name of the PTN file.
Remedy: Check the PTN file name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C04
Display: Machine type mismatch
Used by:
Cause: The machine type for the production program and the PTN file (GSP5 pattern file) are not the
same. It is necessary for the machine type in the production program in use at the time of PTN conversion
and the machine type in the PTN file to be the same.
Remedy: Check the production program and PTN file. Choose the same machine type and resume
operation.
------------------------------
Code: 21001C05
Display: File read error
Used by:
Cause: A file read error occurred during the conversion process. It is possible that the specified
production program or the PTN file has been corrupted. It is also possible that the disk itself is damaged.
Remedy: Check the specified production program and PTN file (GSP5 pattern file) by using the MCS2
editor. Use the DCHECK command in the status display (accessed by simultaneously pressing the control
button and "G" at the UCI screen) to check if there is any problem with the hard disk or floppy disk.
------------------------------
Code: 21001C06
Display: File descriptor not found (Program)
Used by:
Cause: There is no file descriptor for the specified production program or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21001C07
Display: File descripter not found (PTN)
Used by:
Cause: There is no file descriptor for the specified PTN file (GSP5 pattern file) or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21002000
Display: Illigal parameter
Used by:
Cause: The start-up format is incorrect.
Remedy: Check the version numbers on the system and the GD editor. If they are not compatible, install
第 1858 页