FUJI错误代码查询.pdf - 第2209页

is made if the mark data and production program are in different files, the mark data referred to in the production program is required in the applicable machine type and the above error is detected. Remedy: ------------…

------------------------------

Code: 51??1175

Display: "GCCGSCN"not defined.

Used by:

Cause: There is no"GCCGSCN"definition in the"ELEMENT"item delcaration line under"BLOCK","SOLCO".

This was determined when"UNIT","PROGRAM"of the specified production program was read.

Remedy: Check the settings for item"ELEMENT"under"BLOCK","SOLCO"of"UNIT","PROGRAM".

The"GCCGSCN"item setting is required. Since the name of the block("SOLCO")and the value of the

item"ELEMENT"are generally reported in supplemental data,check there.

------------------------------

Code: 51??1176

Display: Missing number in"GCCGSCN"

Used by:

Cause: There is a missing number in the"GCCGSCN"item of the"ELEMENT"item

under"BLOCK","SOLCO". This was determined when"UNIT","PROGRAM"of the specified production

program was read.

Remedy: Check the"ELEMENT"item under"BLOCK","SOLCO"of"UNIT","PROGRAM". The"GCCGSCN"item

must have values set from 1 to the final number in sequential order. Since the name of the

block("SOLCO")and the value of the item"ELEMENT"are generally reported in supplemental data,check

there. Missing numbers are also reported at the default check.

------------------------------

Code: 51??1200

Display: No mark data file.

Used by:

Cause: The mark data file referred to in the specified production program was not found. This report is

made if the mark data and production program are in different files, the mark data referred to in the

production program is required in the applicable machine type and the above error is detected.

Remedy: Check the settings for "GMKFN", "GMKBN", "GMKGN", and "GMNMN" in "BLOCK", "PGHEAD-" in

the production program. Also check whether the file is in the mark data directory.

------------------------------

Code: 51??1201

Display: Mark data file is being used.

Used by:

Cause: The mark data file referred to in the specified production program is being used. This report is

made if the mark data and production program are in different files, the mark data referred to in the

production program is required in the applicable machine type and the above error is detected.

Remedy: Wait until the file is not being used and then re-execute the command.

------------------------------

Code: 51??1202

Display: No authority for mark data file.

Used by:

Cause: There is no access authority for the mark data file referred to in the specified production

program. This report is made if the mark data and production program are in different files, the mark

data referred to in the production program is required in the applicable machine type and the above error

is detected.

Remedy:

------------------------------

Code: 51??1203

Display: Mark data file cannot be opened.

Used by:

Cause: The mark data file referred to in the specified production program cannot be opened. This report

第 2208 页

is made if the mark data and production program are in different files, the mark data referred to in the

production program is required in the applicable machine type and the above error is detected.

Remedy:

------------------------------

Code: 51??1204

Display: No "UNIT", "STRUCT" in mark data file.

Used by:

Cause: There is no "UNIT", "STRUCT" in the mark data file referred to in the specified production

program. This report is made if the mark data and production program are in different files, the mark

data referred to in the production program is required in the applicable machine type and the above error

is detected.

Remedy: Check the settings for "UNIT", "STRUCT" in the mark data file referred to in the production

program.

------------------------------

Code: 51??1205

Display: Mark data file structure error.

Used by:

Cause: A format error was detected in "UNIT", "STRUCT" in the mark data file referred to in the specified

production program. This report is made if the mark data and production program are in different files,

the mark data referred to in the production program is required in the applicable machine type and the

above error is detected.

Remedy: Check the settings for "UNIT", "STRUCT" in the mark data file referred to in the production

program.

------------------------------

Code: 51??1206

Display: Not mark data file.

Used by:

Cause: The mark data file referred to in the specified production program is not a mark data file. This

report is made if the mark data and production program are in different files, the mark data referred to in

the production program is required in the applicable machine type and the above error is detected.

Remedy: Check the settings for "FILETYPE", "FILESTRUCT" in "UNIT", "STRUCT" - "BLOCK", "HEADER" in

the mark data file referred to in the production program.

------------------------------

Code: 51??1207

Display: Mark file read error.

Used by:

Cause: A read error occurred in the mark data file referred to in the specified production program. This

report is made if the mark data and production program are in different files and the above error is

detected.

Remedy: Check the mark data file referred to in the production program.

------------------------------

Code: 51??1210

Display: "FILETYPE" not entered in the mark data file.

Used by:

Cause: "FILETYPE" is not entered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified mark data

file.

Remedy: "FILETYPE" is a mandatory item.

------------------------------

Code: 51??1211

Display: "FILESTRUCT" not registered in the mark data file.

Used by:

第 2209 页

Cause: "FILESTRUCT" is not registered in "UNIT", "STRUCT" - "BLOCK", "HEADER-" in the specified

mark data file.

Remedy: "FILESTRUCT" is a mandatory item.

------------------------------

Code: 51??1212

Display: No "UNIT", "MARK" in mark data file or "UNIT", "MARK" is not at the correct position.

Used by:

Cause: The mark data file referred to in the specified production program was read and "UNIT" ,"MARK"

was not found or "UNIT", "MARK" does not follow the correct unit. This report is made if the mark data

and production program are in different files, the mark data referred to in the production program is

required in the applicable machine type and the above error is detected. When downloading, the mark

data assumes its default values.

Remedy: Check the settings for "UNIT", "MARK" in the mark data file referred to in the production

program. Also check the setting for the "UNIT" line located prior to "UNIT", "MARK".

------------------------------

Code: 51??1213

Display: No "UNIT", "MARK" - "BLOCK" -"HEADER-" in the mark data file.

Used by:

Cause: The mark data file referred to in the specified production program was read and "BLOCK",

"HEADER-" in "UNIT", "MARK" was not found. This report is made if the mark data and production

program are in different files, the mark data referred to in the production program is required in the

applicable machine type and the above error is detected.

Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "HEADER-" in the mark data file referred to in

the production program.

------------------------------

Code: 51??1214

Display: No "UNIT", "MARK" - "BLOCK", "MARKDT-" in the mark data file.

Used by:

Cause: The mark data file referred to in the specified production program was read and "BLOCK",

"MARKDT-" in "UNIT", "MARK" was not found. This report is made if the mark data and production

program are in different files, the mark data referred to in the production program is required in the

applicable machine type and the above error is detected.

Remedy: Check the setting for "UNIT", "MARK" - "BLOCK", "MARKDT-" in the mark data file referred to in

the production program.

------------------------------

Code: 51??1215

Display: "UNIT", "MARK" - "BLOCK", "MARKDT-" multiply defined for same mark.

Used by:

Cause: "UNIT", "MARK" in the specified production program was read and "BLOCK", "MARKDT-" was

multiply defined for the same mark. This report is made if the mark data and production program are in

the same file and the above error is detected. When downloading, the first "BLOCK", "MARKDT-" is valid.

Remedy: At "MARKTYPE" in "UNIT", "MARK" - "BLOCK", "HEADER" in the production program, check that

the same mark is not multiply defined.

------------------------------

Code: 51??1216

Display: Mark data file "UNIT", "MARK" - "BLOCK", "HEADER-" format error.

Used by:

Cause: The mark data file referred to in the specified production program was read and an error detected

in the format of "BLOCK", "HEADER-" in "UNIT", "MARK. This report is made if the mark data and

production program are in different files, the mark data referred to in the production program is required

in the applicable machine type and the above error is detected.

第 2210 页