FUJI错误代码查询.pdf - 第1358页
------------------------------ Code: 1D0C400D Display: Used by: Cause: The lead pitch is too wide and/or the lead width is too wide. Remedy: Check the part. ------------------------------ Code: 1D0C400E Display: Used by:…
------------------------------
Code: 1D0C4001
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape, and the image.
------------------------------
Code: 1D0C4006
Display:
Used by:
Cause: The part is tilted too much.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4007
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4008
Display:
Used by:
Cause: There are fewer than two leads in the upper or lower area of the part.
Remedy: When using Vision #12 there must be at least 2 leads in one area. When this is not the case,
use another vision number.
------------------------------
Code: 1D0C4009
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C400A
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C400B
Display:
Used by:
Cause: The first lead could not be found in each area.
Remedy: Check the lead width, the orientation of the parts as they are fed into the machine and check
that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C400C
Display:
Used by:
Cause: The first lead could not be found in each area.
Remedy: Check the lead width, the orientation of the parts as they are fed into the machine and check
that the vision processing system is taking the image correctly.
第 1357 页
------------------------------
Code: 1D0C400D
Display:
Used by:
Cause: The lead pitch is too wide and/or the lead width is too wide.
Remedy: Check the part.
------------------------------
Code: 1D0C400E
Display:
Used by:
Cause: A missing or broken lead was encountered during vision processing.
Remedy: Check the lead pitch and the orientation of the part.
------------------------------
Code: 1D0C400F
Display:
Used by:
Cause: The lead pitch exceeds the permissible range.
Remedy: Check the shape of the part.
------------------------------
Code: 1D0C4010
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4011
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4012
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4016
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C4019
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401B
Display:
第 1358 页
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401C
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0C401D
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C401F
Display:
Used by:
Cause: There are too many leads.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4020
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C4021
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0C8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0C8100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D0C8110
Display:
Used by:
第 1359 页