FUJI错误代码查询.pdf - 第890页
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier could be damaged. ------------------------------ Code: 12200038 Display: Servo amplifier error. Used by: Cause: Undervolta…
Cause: Abnormal primary circuit detected. All of the detected power circuit data is abnormal.
Remedy: The power supply voltage could be fluctuating. Check the power supply voltage.
Replace Servo amplifier with a new one if there is no abnormal power supply conditions, because
the servo amplifier could be damaged.
------------------------------
Code: 12200032
Display: Servo amplifier error.
Used by:
Cause: Abnormal parameter setting. A parameter is set outside the valid range for that parameter.
Remedy: Check all of the parameter settings for any values outside the valid range.
Replace Servo amplifier with a new one if all of the settings are correct, because the servo amplifier
could be damaged.
------------------------------
Code: 12200033
Display: Servo amplifier error.
Used by:
Cause: Matching error. The motor and servo pack capacities do not match.
Remedy: Check to make sure that there are no wiring problems.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 12200034
Display: Servo amplifier error.
Used by:
Cause: Current overload or the heat sink is too hot. The current meter has detected a surge, or the servo
pack's heat sink is too hot.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
Replace Servo amplifier with a new one if no errors are found, because the servo amplifier could be
damaged.
------------------------------
Code: 12200035
Display: Servo amplifier error.
Used by:
Cause: Regenerative error. Either the regenerative resistance wiring is disconnected, or a regenerative
transistor is damaged.
Remedy: Replace Servo amplifier with a new one, because it is possible that the servo amplifier is
damaged.
------------------------------
Code: 12200036
Display: Servo amplifier error.
Used by:
Cause: Regenerative overload. The regenerative energy is more than the regenerative resistance capacity.
Remedy: The axis rotating speed is too fast, or the regenerative resistance capacity is incorrect.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 12200037
Display: Servo amplifier error.
Used by:
Cause: Overvoltage. The base DC voltage is abnormally high.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
第 889 页
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 12200038
Display: Servo amplifier error.
Used by:
Cause: Undervoltage. The base DC voltage is too low.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 12200039
Display: Servo amplifier error.
Used by:
Cause: Acceleration rate. The motor is rotating abnormally high.
Remedy: The speed setting could be abnormally high. Check the parameter settings.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 1220003a
Display: Servo amplifier error.
Used by:
Cause: Momentary maximum torque. Operation was performed for several seconds at significantly over
the rated torque.
Remedy: Check to ensure that there is no interference or that the axis movement is not impeded. In
addition, check to ensure that none of the motor power lines are broken (U,V,W), or that there are no
shorts.
------------------------------
Code: 1220003b
Display: Servo amplifier error.
Used by:
Cause: DB overload. During dynamic braking, the rotational energy is more than the DB resistance
capacity.
Remedy: The emergency stop process could be incorrect. If this occurs frequently, replace Servo amplifier
with a new one.
------------------------------
Code: 1220003c
Display: Servo amplifier error.
Used by:
Cause: Initial resistance overload. The base power has been repeatedly turned on and off.
Remedy: Check for a short in the power line, or if the wire is broken, when this condition occurs.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 1220003d
Display: Servo amplifier error.
Used by:
Cause: Heat sink is too hot. The heat sink for the servo pack is too hot.
Remedy: Check for abnormalities in the base circuitry or in the wiring for the motor power.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
第 890 页
------------------------------
Code: 1220003e
Display: Servo amplifier error.
Used by:
Cause: Encoder feedback error. Information from the encoder is abnormal.
Remedy: Check for breaks in the encoder wiring, or for bad connections.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 1220003f
Display: Servo amplifier error.
Used by:
Cause: Erratic movement detected. Motor was out of control.
Remedy: Check the base circuit wiring, motor power wiring, and encoder wiring for any abnormalities.
Replace Servo amplifier with a new one if no abnormalities are found, because the servo amplifier
could be damaged.
------------------------------
Code: 12200040
Display: Servo amplifier error.
Used by:
Cause: Positioning deviation is too large. Positioning deviation pulse was over the set value.
Remedy: Check to ensure that the deviation setting is appropriate.
Investigate the reason for it being out of control.
------------------------------
Code: 12200041
Display: Servo amplifier error.
Used by:
Cause: Power out of phase. One of the three phases for the power is not connected.
Remedy: Check to ensure that all wires for the three phases are not broken, or have any shorts.
------------------------------
Code: 12200042
Display: Servo amplifier error.
Used by:
Cause: Watch dog error. Abnormal SERCOS communication has occurred.
Remedy: Check to ensure that the digital operator is not connected.
Replace SERCOS unit with a new one if this occurs frequently, because the SERCOS unit could be
damaged.
------------------------------
Code: 12200043
Display: Servo amplifier error.
Used by:
Cause: MST, MDT error. SERCOS communication is abnormal.
Remedy: Check the fiber optic connections and make sure the digital operator is not connected.
Replace SERCOS board with a new one if no abnormalities are found, because the SERCOS board
could be damaged.
------------------------------
Code: 12200044
Display: Boot timeout.
Used by:
Cause: RTX Servo filter execution file is timeout of boot.
Remedy: There is possibility that version up isn't correct.Reinstall the recovery media software.
第 891 页