FUJI错误代码查询.pdf - 第1786页

------------------------------ Code: 1D66F??? Display: Used by: Cause: There was a logical error in the management program. Remedy: Check Part data. ------------------------------ Code: 1D670001 Display: Used by: Cause: …

Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D66C4??

Display:

Used by:

Cause: An edge could not be detected on the left side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D66C5??

Display:

Used by:

Cause: An edge could not be detected on the lower side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D66C6??

Display:

Used by:

Cause: An edge could not be detected on the right side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D66C7??

Display:

Used by:

Cause: An edge could not be detected on the upper side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D66D000

Display:

Used by:

Cause: The part pickup slippage was too large (X direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D66D080

Display:

Used by:

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D66E???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

第 1785 页

------------------------------

Code: 1D66F???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D670001

Display:

Used by:

Cause: A range error occurred during vision processing.

Remedy: A range error occurs when a check is performed on a part but the check point is not on the

image. This could be caused by

1) a large part being picked incorrectly, resulting in an incomplete image;

2) an incorrect CCD level setting or broken nozzle, resulting in a bad image;

3) an incorrect value entered in Part data (PDG) so that vision processing could not be done;

4) the Proper values CCD_X and CCD_Y are incorrect, resulting in a bad image;

5) a problem with the vision processing system program. Check the above listed conditions.

------------------------------

Code: 1D670002

Display:

Used by:

Cause: The part could not be found.

Remedy: Check the condition of the part feeding system. Check the CCD level and the nozzle sizes

entered in Proper data. When using a 1608 part S nozzle (1.00 mm) check whether or not the normal size

(1.3 mm) is entered. If this is the case and a 1608 part is picked, vision processing might register this as

not a part. If the CCD level is too high, the image will be too dark, and vision processing might register

this as not a part.

------------------------------

Code: 1D670006

Display:

Used by:

Cause: The part was tilted more than 45 deg. and processing was therefore cancelled.

Remedy: Check that the picking conditions have not gone bad.

------------------------------

Code: 1D670007

Display:

Used by:

Cause: A range error occurred during vision processing.

Remedy: None.

------------------------------

Code: 1D670008

Display:

Used by:

Cause: The lead information in Part data (PDG) was checked, and there are not more than two leads on

the appropriate side.

Remedy: Check the following items in PDG: number of leads, lead information and the orientation of the

parts on the feeder.

------------------------------

Code: 1D670009

Display:

第 1786 页

Used by:

Cause: A range error occurred during vision processing, and the processing was cancelled.

Remedy: A range error occurs when a check is performed on a part but the check point is not on the

image. This could be caused by

1) a large part being picked incorrectly, resulting in an incomplete image;

2) an incorrect CCD level setting or broken nozzle, resulting in a bad image;

3) an incorrect value entered in Part data (PDG) so that vision processing could not be done;

4) the Proper values CCD_X and CCD_Y are incorrect, resulting in a bad image;

5) a problem with the vision processing system program. Check the above listed conditions.

------------------------------

Code: 1D67000A

Display: 0010

Used by:

Cause: A range error occurred during vision processing, and the processing was cancelled.

Remedy: A range error occurs when a check is performed on a part but the check point is not on the

image. This could be caused by

1) a large part being picked incorrectly, resulting in an incomplete image;

2) an incorrect CCD level setting or broken nozzle, resulting in a bad image;

3) an incorrect value entered in Part data (PDG) so that vision processing could not be done;

4) the Proper values CCD_X and CCD_Y are incorrect, resulting in a bad image;

5) a problem with the vision processing system program. Check the above listed conditions.

------------------------------

Code: 1D67000B

Display: 0011

Used by:

Cause: The first lead could not be found during vision processing. A range error occurred during vision

processing, and the processing was cancelled.

Remedy: A range error occurs when a check is performed on a part but the check point is not on the

image. This could be caused by

1) a large part being picked incorrectly, resulting in an incomplete image;

2) an incorrect CCD level setting or broken nozzle, resulting in a bad image;

3) an incorrect value entered in Part data (PDG) so that vision processing could not be done;

4) the Proper values CCD_X and CCD_Y are incorrect, resulting in a bad image;

5) a problem with the vision processing system program. Check the above listed conditions.

------------------------------

Code: 1D67000C

Display: 0012

Used by:

Cause: The first lead could not be found during vision processing.

Remedy: Check that the part pickup conditions were OK.

------------------------------

Code: 1D67000D

Display: 0013

Used by:

Cause: Either the bright space exceeded the lead pitch by 50% or the dark space exceeded the lead width

by 50%. The dark space represents the actual lead width.

Remedy: Check the entries in Part data (PDG) for lead width, lead pitch and check the CCD level.

------------------------------

Code: 1D67000E

Display: 0014

Used by:

第 1787 页