FUJI错误代码查询.pdf - 第768页

Remedy: Turn the PMC off and on again, then restart from zero setting. ------------------------------ Code: 12074?01 Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "MotionCntlErr;Set Para2" (QP2)…

100%1 / 5282
The first ? in the error code represents the module number from 1 ? 16. 0, however, represents PMC 16.
The second ? denotes the feeder position.
1: slot number 1 sub-slot number 0 or 1
2: slot number 1 sub-slot number 2
3: slot number 2 sub-slot number 0 or 1
4: slot number 2 sub-slot number 2
5: slot number 3 sub-slot number 0 or 1
6: slot number 3 sub-slot number 2
7: slot number 4 sub-slot number 0 or 1
8: slot number 4 sub-slot number 2
9: slot number 5 sub-slot number 0 or 1
A: slot number 5 sub-slot number 2
B: slot number 6 sub-slot number 0 or 1
C: slot number 6 sub-slot number 2
?? in PM?? denotes the module number. ****** refers to the command name.
The first ? denotes the module number, where the second ? denotes the slot position.
Remedy: Ensure that the feeder is properly set in position.
------------------------------
Code: 12073??C
Display: The feeder status is BUSY.
PM?? [******]
Err Code: 12073??C
Used by: QP132
Cause: The operation could not be carried out. A feeding request had already been received or the
operator was feeding manually when another feeding request (SSEFED) was received at the feeder.
(The first "?" of the error code indicates the module number in hexadecimal notation. PMC 16 displays as
"0".)
(The second "?" of the error code indicates the feeder position.)
1: Subslot 0 or 1 of slot 1.
2: Subslot 2 of slot 1
3: Subslot 0 or 1 of slot 2
4: Subslot 2 of slot 2
5: Subslot 0 or 1 of slot 3
6: Subslot 2 of slot 3
7: Subslot 0 or 1 of slot 4
8: Subslot 2 of slot 4
9: Subslot 0 or 1 of slot 5
A: Subslot 2 of slot 5
B: Subslot 0 or 1 of slot 6
C: Subslot 2 of slot 6
("PM??" indicates the module number. "[******]" indicates the command.)
Remedy: Restart automatic operation. Replace the feeder if the problem is recurring.
------------------------------
Code: 12074?00
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Set Para1" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (parameter set 1).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 767 页
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?01
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Set Para2" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (parameter set 2)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?02
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Servo On/Off" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (servo power on/off).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?03
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;JOG Command" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (JOG command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?04
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Zero Setting" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (zero setting command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?05
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Positioning" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (positioning command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
第 768 页
------------------------------
Code: 12074?06
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;ZbrakeOn/Off" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (Z brake on/off).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?07
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Stopping" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (stop command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?08
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Reduce Speed" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (deceleration command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?09
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;Count Offset" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (counter offset).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0A
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"MotionCntlErr;0 Adjst Ofst" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion controller error response (zero adjust offset too large).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
第 769 页