FUJI错误代码查询.pdf - 第2009页

Display: Used by: Cause: The line descriptor could not be opened. Remedy: Make sure that the line descriptor has been created correctly. ------------------------------ Code: 2100A30B Display: not nickname Used by: Cause:…

100%1 / 5282
Code: 2100A302
Display: /pipe/transmit prcs open error
Used by:
Cause: The pipe from the TC to the transmit process could not be opened.
Remedy: When this error occurs and transmission cannot be carried out, re-boot MCS.
------------------------------
Code: 2100A303
Display: /pipe/tci back open error
Used by:
Cause: The production program data pipe could not be opened.
Remedy: When this error occurs and transmission cannot be carried out, re-boot MCS.
------------------------------
Code: 2100A304
Display: time over
Used by:
Cause: Information could not be read from the pipe within the fixed time.
Remedy: Check that the machine is on. Also, check MCS line descriptor. If the error still occurs, perform
communication in Off_line mode.
------------------------------
Code: 2100A305
Display: File oepn error
Used by:
Cause: A file required for transmission could not be opened.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A306
Display: Command error
Used by:
Cause: Incorrect transmit command.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A307
Display: environment file open error
Used by:
Cause: The environment variable file could not be opened.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A308
Display: not filename and mc err
Used by:
Cause: The specified production program does not exist.
Remedy: Use the Directory function in the Use the directory function in the file services menu to check
the file.
------------------------------
Code: 2100A309
Display: msg error
Used by:
Cause: The message file could not be opened.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A30A
第 2008 页
Display:
Used by:
Cause: The line descriptor could not be opened.
Remedy: Make sure that the line descriptor has been created correctly.
------------------------------
Code: 2100A30B
Display: not nickname
Used by:
Cause: The line cannot send back Proper data.
Remedy: Choose the machine from which Proper data is to be transmitted.
------------------------------
Code: 2100A30C
Display: not progname
Used by:
Cause: The specified program could not be found.
Remedy: Use the file services directory to check that the program exists.
------------------------------
Code: 2100A30D
Display: stat file read error
Used by:
Cause: Unable to read the status file.
Remedy: Use the directory function in the file services menu to check the file.
------------------------------
Code: 2100A30E
Display: stat file writ error
Used by:
Cause: Data could not be written to the temporary file required for Status transmission.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A30F
Display: ls fork error
Used by:
Cause: The directory function could not be started up.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A310
Display: ls error
Used by:
Cause: A problem exists with the directory function.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A311
Display: /pipe/pr open error
Used by:
Cause: The printer pipe could not be opened.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A312
Display: /pipe/tci dir open error
Used by:
Cause: The pipe for the return value from the directory could not be opened.
第 2009 页
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A313
Display: !?:A313 Wait file full
Used by:
Cause: The transfer buffer is full.
Remedy: Halt transmission until the buffer empties again.
------------------------------
Code: 2100A314
Display: pck fork error
Used by:
Cause: The data check function could not be started
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A315
Display: Justify error
Used by:
Cause: A problem exists with the data check function.
Remedy: Re-select the program.
------------------------------
Code: 2100A316
Display: not change program
Used by:
Cause: A program named "0" was specified, so program change could not be carried out.
Remedy: Specify a program other than "0".
------------------------------
Code: 2100A317
Display: NO MC actvei
Used by:
Cause: The machine cannot transmit.
Remedy: Check that the machine is on. This message is not currently in use.
------------------------------
Code: 2100A318
Display: NO procedur file
Used by:
Cause: The procedure file has not been specified, or the wrong line has been specified.
Remedy: Check the line, and/or specify the procedure file.
------------------------------
Code: 2100A319
Display: NO select line name
Used by:
Cause: An incorrect line name was chosen.
Remedy: Specify the correct line name.
------------------------------
Code: 2100A31A
Display: NOW WAITING
Used by:
Cause: The machine is now communicating and your command is being processed.
Remedy: Wait for the machine to finish.
------------------------------
Code: 2100A31B
第 2010 页