FUJI错误代码查询.pdf - 第2028页
Remedy: Input the evaluation filename. ------------------------------ Code: 2100B183 Display: Saving disk not ready Used by: Cause: The saving disk has not been set. Remedy: Put the floppy disk into the disk drive. -----…
Display: Printout device file create error
Used by:
Cause: Unable to create the printout device file.
Remedy: Re-execute the function. If the error recurs, shorten the evaluation time.
------------------------------
Code: 2100B17B
Display: Device comment tmp file open error
Used by:
Cause: Unable to open the device comment temporary file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B17C
Display: Device comment tmp file read error
Used by:
Cause: Unable to read the device comment temporary file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B17D
Display: Device comment tmp file write error
Used by:
Cause: Unable to write to the device comment temporary file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B17E
Display: Setting file create error
Used by:
Cause: Unable to create the setting file.
Remedy: Shorten the specified start time.
------------------------------
Code: 2100B17F
Display: Setting file open error
Used by:
Cause: Unable to open the setting file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B180
Display: Setting file read error
Used by:
Cause: Unable to read the setting file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B181
Display: Setting file write error
Used by:
Cause: Unable to write to the setting file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B182
Display: Not input eval output filename
Used by:
Cause: The evaluation output filename was not input.
第 2027 页
Remedy: Input the evaluation filename.
------------------------------
Code: 2100B183
Display: Saving disk not ready
Used by:
Cause: The saving disk has not been set.
Remedy: Put the floppy disk into the disk drive.
------------------------------
Code: 2100B184
Display: Eval file saving error
Used by:
Cause: Unable to save the evaluation file.
Remedy: Re-execute the function. Check the disk memory, and check whether or not the file exists.
------------------------------
Code: 2100B185
Display: Program total file open error
Used by:
Cause: Unable to open the program total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B186
Display: Program total file read error
Used by:
Cause: Unable to read the program total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B187
Display: Program total file write error
Used by:
Cause: Unable to write to the program total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B188
Display: Device total file open error
Used by:
Cause: Unable to open the device total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B189
Display: Device total file read error
Used by:
Cause: Unable to read the device total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B18A
Display: Device total file write error
Used by:
Cause: Unable to write to the device total file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B18B
第 2028 页
Display: PT trouble code table full
Used by:
Cause: The number of PT trouble reports exceeds 100.
Remedy: Shorten the evaluation time.
------------------------------
Code: 2100B18C
Display: PE error code table full
Used by:
Cause: The number of PE error codes exceeds 100.
Remedy: Shorten the evaluation time.
------------------------------
Code: 2100B18D
Display: Nozzle file not found
Used by:
Cause: Nozzle file not found.
Remedy: Check that the nozzle table exists.
------------------------------
Code: 2100B18E
Display: Nozzle file open error
Used by:
Cause: Unable to open the nozzle table.
Remedy: Check that the nozzle table exists.
------------------------------
Code: 2100B18F
Display: Nozzle file read error
Used by:
Cause: Unable to read the nozzle table.
Remedy: Check that the nozzle table exists.
------------------------------
Code: 2100B190
Display: Nozzle assginment nameundefine in program data
Used by:
Cause: The production program's nozzle table file was not found.
Remedy: Check the entry under the Nozzle_assignment_table heading in the production program.
------------------------------
Code: 2100B191
Display: Mainte device tmp file creat error
Used by:
Cause: Unable to create the maintenance device temporary file.
Remedy: Return to the UCI menu and re-execute the function. Shorten the evaluation time.
------------------------------
Code: 2100B192
Display: Mainte device tmp file open error
Used by:
Cause: Unable to open the maintenance device temporary file.
Remedy: Return to the UCI menu and re-execute the function.
------------------------------
Code: 2100B193
Display: Mainte device tmp file read error
Used by:
Cause: Unable to read the maintenance device temporary file.
第 2029 页