FUJI错误代码查询.pdf - 第238页

Error handling mode (Recovery) Recovery timing (Recovery) Block skip mark reading mode (Operation) Nozzle station (Nozzle Settings) Nozzle alllocation (Nozzle Settings) ------------------------------ Code: 11100406 Displ…

100%1 / 5282
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100402
Display: File save error!
Used by: NP2,QP3
Cause: Failed to write the machine status file to the hard disk.
Remedy: Check the condition of the hard disk.
------------------------------
Code: 11100403
Display: File creation error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the machine status file. All machine status settings have
been cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100404
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision file for the system is too old. All system settings have been cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100405
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision file for the machine status file is too new. All machine status settings have been
cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
第 237 页
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100406
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the machine status file. All machine status settings have
been cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100407
Display: Out-of-range error!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are outside the prescribed range. All machine status
settings have been cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
Code: 11100408
Display: Insufficient data!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are missing from the machine status file. All system
settings have been cleared.
Remedy: The following items must be specified again.
Program
Production mode (Production)
Operation mode (Operation
Error handling mode (Recovery)
Recovery timing (Recovery)
Block skip mark reading mode (Operation)
Nozzle station (Nozzle Settings)
Nozzle alllocation (Nozzle Settings)
------------------------------
第 238 页
Code: 11100409
Display: Machine status memory file error
Used by: NP2,QP3
Cause: data in the memory file was cleared at the previous power off.
Remedy: Specify the following: production program, production mode, operation mode, recovery mode,
recovery operation mode, BS mark reading mode, nest name, nozzle memory.
------------------------------
Code: 11100501
Display: File-open error!
Used by: NP2,QP3
Cause: Failed to open the nozzle memory file.
Remedy: Load the settings using the [Update] command.
------------------------------
Code: 11100502
Display: File save error!
Used by: NP2,QP3
Cause: Failed to write nozzle memory file to the hard disk.
Remedy: Check the condition of the hard disk.
------------------------------
Code: 11100503
Display: File creation error!
Used by: NP2,QP3
Cause: Failed to create new nozzle memory file.
Remedy: Check the condition of the hard disk.
------------------------------
Code: 11100504
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision of the nozzle memory file is too old. All data items have been reset to their default
values.
Remedy: Load the settings using the [Update] command.
------------------------------
Code: 11100505
Display: Revision file error!
Used by: NP2,QP3
Cause: The revision file for the nozzle memory file is too new. All nozzle settings have been cleared.
Remedy: Load the settings using the [Update] command.
------------------------------
Code: 11100506
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the nozzle memory file. All nozzle settings have been
cleared.
Remedy: Load the settings using the [Update] command.
------------------------------
Code: 11100507
Display: Out-of-range error!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are outside the prescribed range. All nozzle settings
have been cleared.
Remedy: Load the settings using the [Update] command.
第 239 页