FUJI错误代码查询.pdf - 第1383页

Used by: Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)). Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used. ------------------…

Code: 1D0DE???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Cheak the entries in Part data and Device

data.

------------------------------

Code: 1D0DF???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D0E0002

Display:

Used by:

Cause: The part cannot be picked.

Remedy: Replenish the part supply.

------------------------------

Code: 1D0E0010

Display:

Used by:

Cause: An edge without leads was not found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0011

Display:

Used by:

Cause: An edge without leads was not found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0012

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0013

Display:

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0014

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0015

Display:

第 1382 页

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0016

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0017

Display:

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0018

Display:

Used by:

Cause: The lead length was too short (less than 90% of the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0019

Display:

Used by:

Cause: The lead length was too long (over 10% longer than the setting in Part data (PDG)).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001A

Display:

Used by:

Cause: The part shape is not what was expected. Vision processing cannot take a good image.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001B

Display:

Used by:

Cause: There are too many leads (set in PDG).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E001C

Display:

Used by:

Cause: There are too many leads (set in PDG).

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0020

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

第 1383 页

------------------------------

Code: 1D0E0021

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0022

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0023

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0024

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0025

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0026

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0027

Display:

Used by:

Cause: The corner lead cannot be found.

Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.

------------------------------

Code: 1D0E0041

Display:

Used by:

Cause: The lead cannot be found. The pitch was too wide or there were not enough leads.

Remedy: Check that the nozzle is not dirty, that foreign matter is not stuck to the part and that the

correct part was picked.

------------------------------

Code: 1D0E0060

第 1384 页