FUJI错误代码查询.pdf - 第2048页
Display: line or machine name fatal error Used by: Cause: The line name or machine name was not found. Remedy: Check the line name or the machine name. ------------------------------ Code: 2100B528 Display: file revision…
Remedy: Change the name.
------------------------------
Code: 2100B51D
Display: log file read error
Used by:
Cause: Unable to read the logfile.
Remedy: Check the logfile name.
------------------------------
Code: 2100B51E
Display: program data file not found error
Used by:
Cause: The production program was not found.
Remedy: Check that the production program exists.
------------------------------
Code: 2100B51F
Display: program data file read error
Used by:
Cause: Unable to read the production program.
Remedy: Check the production program.
------------------------------
Code: 2100B520
Display: log file rewrite error
Used by:
Cause: A log file with the same name already exists.
Remedy: Either overwrite the file, or change disks.
------------------------------
Code: 2100B521
Display: program data file rewrite error
Used by:
Cause: A program of the same name already exists.
Remedy: Overwrite that program or use a different disk.
------------------------------
Code: 2100B522
Display: part file rewrite error
Used by:
Cause: A Part data file of the same name already exists.
Remedy: Overwrite the file or use a different disk.
------------------------------
Code: 2100B523
Display: reference partfile not found error
Used by:
Cause: The Part data file was not found.
Remedy: Check that the Part data file exists.
------------------------------
Code: 2100B524
Display: harddisk full error.
Used by:
Cause: The hard disk is full.
Remedy: Delete unnecessary files to allocate memory.
------------------------------
Code: 2100B527
第 2047 页
Display: line or machine name fatal error
Used by:
Cause: The line name or machine name was not found.
Remedy: Check the line name or the machine name.
------------------------------
Code: 2100B528
Display: file revision error
Used by:
Cause: The log file is the old version.
Remedy: Choose a new version file.
------------------------------
Code: 2100B529
Display: Pallet file not found
Used by:
Cause: The pallet file was not found.
Remedy: Check the pallet file.
------------------------------
Code: 2100B52A
Display: Nozzle file not found
Used by:
Cause: The nozzle file was not found.
Remedy: Check the nozzle file.
------------------------------
Code: 2100B52B
Display: Work file cannot create
Used by:
Cause: An error occurred when creating a temporary file.
Remedy: At the UCI screen, restart the log file.
------------------------------
Code: 2100B52C
Display: Work file cannot open
Used by:
Cause: An error occurred when opening a temporary file.
Remedy: At the UCI screen, restart the log file.
------------------------------
Code: 2100B52D
Display: Work file cannot read
Used by:
Cause: An error occurred when reading a temporary file.
Remedy: At the UCI screen, restart the log file.
------------------------------
Code: 2100B52E
Display: Work file cannot write
Used by:
Cause: An error occurred when writing a temporary file.
Remedy: Do not combine files which exceed the Fuji specified file size.
------------------------------
Code: 2100B52F
Display: Offset table work file create error
Used by:
Cause: An error occurred when creating a work file for generating the offset table.
第 2048 页
Remedy: At the UCI screen, re-execute the file. If this does not work, execute the file after completing the
operation presently being executed. If this does not work, reboot the MCS. Do not combine files which
exceed the Fuji specified file size.
------------------------------
Code: 2100B530
Display: Offset table work file open error
Used by:
Cause: An error occurred when opening the work file for generating the offset table.
Remedy: At the UCI screen, re-execute the file.
------------------------------
Code: 2100B531
Display: Offset table work file read error
Used by:
Cause: Data could not be read from the work file for generating the offset table.
Remedy: At the UCI screen, re-execute the file.
------------------------------
Code: 2100B532
Display: Offset table work file write error
Used by:
Cause: Data could not be written to the work file for generating the offset table.
Remedy: After completing the present operation, re-execute the file. If this does not work, reboot the
MCS. Do not combine files which exceed the Fuji specified file size.
------------------------------
Code: 2100B533
Display: Eval file copying error
Used by:
Cause: The file for combining Eval files created in RAM could not be copied under the specified name.
Remedy: Erase any unnecessary files on the specified output disk and re-execute the log file again.
------------------------------
Code: 2100B534
Display: When Eval file were merged,memory space could not be allocated
Used by:
Cause: When combining EVAL files, the necessary memory could not be secured.
Remedy: After completing the present operation, re-execute the file. If this does not work, reboot the
MCS. Do not combine files which exceed the Fuji specified file size.
------------------------------
Code: 2100B535
Display: Merge work file create error
Used by:
Cause: The work file for combining the Eval files could not be created.
Remedy: Re-execute the file at the UCI screen. If this does not work, re-execute the file after completing
the operation presently being executed. If this does not work, reboot the MCS. Do not combine files
which exceed the Fuji specified file size.
------------------------------
Code: 2100B536
Display: Merge work file open error
Used by:
Cause: An error occurred when the work file for combining the Eval files was opened.
Remedy: Re-execute the file at the UCI screen.
------------------------------
Code: 2100B537
第 2049 页