FUJI错误代码查询.pdf - 第228页

Alternatively, download an uncorrupted program and select it using the [Program] command. ------------------------------ Code: 11100106 Display: Insufficient data! Used by: NP2,QP3 Cause: The items displayed in the param…

100%1 / 5282
the MTU and IP, the data may be corrupted.
------------------------------
Code: 11100000
Display: Parser process error!
Used by: CP732
Cause: In a parser process, the malfunction which it is impossible to recover occurred.
Remedy: Acquire and deliver a trace data to FUJI with the information of the occurrence situation.
Do shutdown.
------------------------------
Code: 11100001
Display: File error!
Used by: CP732
Cause: It failed in the file operation.For the details, you refer to the error panel on the machine.
Remedy: You refer to the error panel on the machine.
------------------------------
Code: 11100002
Display: Data checking error!
Used by: CP732
Cause: The data checking error occurred by the reading processing or by the writing processing of a file.
For the details, you refer to the error panel on the machine.
Remedy: You refer to the error panel on the machine.
------------------------------
Code: 11100101
Display: File-open error!
Used by: NP2,QP3
Cause: Failed to open the selected program.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100102
Display: File save error!
Used by: NP2,QP3
Cause: Failed to write the program to the hard disk:
Remedy: Check the condition of the hard disk.
------------------------------
Code: 11100103
Display: File-type error!
Used by: NP2,QP3
Cause: The selected file is not a program file.
Remedy: Download the required program file and select it using the [Program] command.
------------------------------
Code: 11100104
Display: CCIMF file format error!
Used by: NP2,QP3
Cause: A CCIMF file format error occurred for the program file.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100105
Display: Out-of-range error!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are outside the prescribed range.
Remedy: Select the [Program Editor] command to edit the program.
第 227 页
Alternatively, download an uncorrupted program and select it using the [Program] command.
------------------------------
Code: 11100106
Display: Insufficient data!
Used by: NP2,QP3
Cause: The items displayed in the parameter section are missing from the program file.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100107
Display: Nozzle(s) missing!
Used by: NP2,QP3
Cause: Cannot find the nozzles specified in the program.
Remedy: Insert the required nozzles in the station and use the [Nozzle Settings] command to make the
required changes.
------------------------------
Code: 11100108
Display: Nozzle name consistency error!
Used by: NP2,QP3
Cause: The nozzles specified in the program are missing from the NAT file.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
Alternatively, download an uncorrupted NAT file and restart the machine.
------------------------------
Code: 11100109
Display: Nozzle name consistency error!
Used by: NP2,QP3
Cause: The nozzle station name specified in the program differs from that in memory.
Remedy: Exchange the nozzle station or use the [Update] command to update machine memory.
Note: Production with a different nozzle station is possible as long as the required nozzles are
available.
------------------------------
Code: 1110010A
Display: Nozzle station consistency error!
Used by: NP2,QP3
Cause: The nozzle station specified in the program are missing from the nozzle station file.
Remedy: Download an uncorrupted program file and select it usiAlternatively, download an uncorrupted
nozzle station file and restart the machine.
------------------------------
Code: 1110010B
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Failed to close next device loop.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 1110010C
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: The next device slot exceeds the number available at the specified stage.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 1110010D
Display: Production program data mismatch.
第 228 页
Used by: NP2,QP3
Cause: Device data and feeder data are not consistent.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 1110010E
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Feeder and part data are not consistent.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 1110010F
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Part number data and part shape data are not consistent.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100110
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Part number data and part packaging data are not consistent.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100111
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Sequence and feeder data are not consistent.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100112
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Fiducial marks are missing from the program.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100113
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Block skip marks are missing from the program.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100114
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: The mark sequence being referred to by a mark does not exist.
Either the mark is referring itself or a mark that is read in a later sequence.
Remedy: Download an uncorrupted program file and select it using the [Program] command.
------------------------------
Code: 11100115
Display: Production program data mismatch.
Used by: NP2,QP3
Cause: Mark sequences that are referenced by the placing sequences are missing from the program.
第 229 页