FUJI错误代码查询.pdf - 第869页
Cause: The displayed file is possibly corrupted. Remedy: After checking the settings, reinstall the recovery media software. Contact Fuji if this error cannot be corrected, because the hard disk could be damaged. -------…
and the servo initialization file settings.
------------------------------
Code: 1211001a
Display: Abnormal SERCOS communication.
Used by:
Cause: A node is missing from the SERCOS ring. An amplifier dip switch setting is incorrect, or a servo
initialization file setting is incorrect.
Remedy: Check the connections in the SERCOS ring, the amplifier dip switch and rotary switch settings,
and the servo initialization file settings.
------------------------------
Code: 1211001b
Display: Servo initialization file error.
Used by:
Cause: There is an inappropriate setting in the servo initialization file, or the displayed file is corrupted.
Remedy: After checking the settings, reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 1211001c
Display: A setting is outside the valid range.
Used by:
Cause: A setting in the servo initialization file is outside the valid range, or the displayed file is corrupted.
Remedy: After checking the settings, reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 1211001d
Display: Insufficient working memory.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 1211001e
Display: Parameter setting error.
Used by:
Cause: The sequence order of settings in the servo initialization file is incorrect, or the servo initialization
file is corrupted.
Remedy: After checking the settings, reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 1211001f
Display: Parameter error.
Used by:
Cause: An incorrect parameter is set in the servo initialization file, or the servo initialization file is
corrupted.
Remedy: After checking the settings, reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 12110020
Display: Cannot access a file.
Used by:
第 868 页
Cause: The displayed file is possibly corrupted.
Remedy: After checking the settings, reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 12110021
Display: Program and DLLs do not correspond.
Used by:
Cause: The current program and DLLs are not appropriate, or the installation failed.
Remedy: Reinstall the recovery media software.
Contact Fuji if this error cannot be corrected, because the hard disk could be damaged.
------------------------------
Code: 12110022
Display: SERCOS communication error.
Used by:
Cause: Communication is not performed if the digital operator was attached when communication
initialization is performed, or the SERCOS drive software version does not match.
Remedy: Disconnect the digital operator and restart the machine, or check the SERCOS drive software
version.
Contact Fuji if this error cannot be corrected, because the SERCOS drive could be damaged.
------------------------------
Code: 12110023
Display: SERCOS loop disconnected.
Used by:
Cause: The SERCOS loop is disconnected, a fiber optic connector is broken, or the fiber optics are
connected in the wrong order.
Remedy: Check the order of the fiber optic connections, and the condition of the connectors.
Contact Fuji if this error cannot be corrected, because the SERCOS drive could be damaged.
------------------------------
Code: 12110030
Display: Servo amplifier error.
Used by:
Cause: Parameters are corrupted. Servo pack EEPROM data is abnormal.
Remedy: Contact Fuji because the servo amplifier could be damaged.
------------------------------
Code: 12110031
Display: Servo amplifier error.
Used by:
Cause: Abnormal primary circuit detected. All of the detected power circuit data is abnormal.
Remedy: The power supply voltage could be fluctuating. Check the power supply voltage.
Contact Fuji if there is no abnormal power supply conditions, because the servo amplifier could
be damaged.
------------------------------
Code: 12110032
Display: Servo amplifier error.
Used by:
Cause: Abnormal parameter setting. A parameter is set outside the valid range for that parameter.
Remedy: Check all of the parameter settings for any values outside the valid range.
Contact Fuji if all of the settings are correct, because the servo amplifier could be damaged.
------------------------------
Code: 12110033
Display: Servo amplifier error.
第 869 页
Used by:
Cause: Matching error. The motor and servo pack capacities do not match.
Remedy: Check to make sure that there are no wiring problems.
Contact Fuji if no abnormalities are found, because the servo amplifier could be damaged.
------------------------------
Code: 12110034
Display: Servo amplifier error.
Used by:
Cause: Current overload or the heat sink is too hot. The current meter has detected a surge, or the servo
pack's heat sink is too hot.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
Contact Fuji if no errors are found, because the servo amplifier could be damaged.
------------------------------
Code: 12110035
Display: Servo amplifier error.
Used by:
Cause: Regenerative error. Either the regenerative resistance wiring is disconnected, or a regenerative
transistor is damaged.
Remedy: Contact Fuji, because it is possible that the servo amplifier is damaged.
------------------------------
Code: 12110036
Display: Servo amplifier error.
Used by:
Cause: Regenerative overload. The regenerative energy is more than the regenerative resistance capacity.
Remedy: The axis rotating speed is too fast, or the regenerative resistance capacity is incorrect.
Contact Fuji if no abnormalities are found, because the servo amplifier could be damaged.
------------------------------
Code: 12110037
Display: Servo amplifier error.
Used by:
Cause: Overvoltage. The base DC voltage is abnormally high.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
Contact Fuji if no abnormalities are found, because the servo amplifier could be damaged.
------------------------------
Code: 12110038
Display: Servo amplifier error.
Used by:
Cause: Undervoltage. The base DC voltage is too low.
Remedy: The power supply voltage could be fluctuating. Check the voltage.
Contact Fuji if no abnormalities are found, because the servo amplifier could be damaged.
------------------------------
Code: 12110039
Display: Servo amplifier error.
Used by:
Cause: Acceleration rate. The motor is rotating abnormally high.
Remedy: The speed setting could be abnormally high. Check the parameter settings.
Contact Fuji if no abnormalities are found, because the servo amplifier could be damaged.
------------------------------
Code: 1211003a
Display: Servo amplifier error.
Used by:
第 870 页