FUJI错误代码查询.pdf - 第730页

"No Nozzle Specified in PD" (QP2) Used by: QP242 Cause: The Proper data does not contain settings for the nozzle specified by the Part data. (value replacing "?" is module number; error code appears i…

100%1 / 5282
"Unaccepted Due to Err Stop" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A request could not be executed because it was received while the machine was stopped due to
an error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?53
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Multiple Command Unaccepted" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A multiple-operation command was not recognized while operating in manual mode.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?55
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Mode / Not Auto Mode" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A command that must be received during automatic operation has been received while in some
other mode.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?56
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Mode / In Auto Mode" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A command that must be received while in a mode other than automatic operation has been
received during automatic operation.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?57
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
第 729 页
"No Nozzle Specified in PD" (QP2)
Used by: QP242
Cause: The Proper data does not contain settings for the nozzle specified by the Part data.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Check the nozzle data in the Device data and the Proper data for the module the caused the
error.
------------------------------
Code: 12070?58
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Desired NSS Occupied" (QP2)
Used by: QP242
Cause: The desired nozzle select station storage location is not available.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Check the head nozzle and the head nozzle number, then either remove the nozzle from the
desired nozzle select station storage location, or change the head nozzle number.
------------------------------
Code: 12070?59
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Nozzle Orgn Sensor Error" (QP2)
Used by: QP242
Cause: The nozzle check sensor at the nozzle select station is not functioning.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: If the nozzle in question is an index nozzle, the nozzle has not been rotated sufficiently. If it is a
single nozzle, the machine has failed to detect a dropped nozzle. Replace the nozzle in its proper position,
then make sure the nozzle check sensor is functioning normally.
------------------------------
Code: 12070?5A
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Nozzle Check sensor Error" (QP2)
Used by: QP242
Cause: The result of a nozzle check was erroneous.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Check the head nozzle and the head nozzle number. Make sure the nozzle check sensor is
functioning normally.
------------------------------
Code: 12070?5B
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Operating with Inching Box" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine has received a request appropriate to automatic operation or another mode while
being operated from the inching box.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Start automatic operation when inching is complete. If the problem occurs again, use a reset-
start to transmit the control software to the PMC. If the problem is recurring, issues such as a faulty PMC
control board may be the cause.
------------------------------
Code: 12070?5C
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Can't Exe Due to Servo Off" (QP2)
第 730 页
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine has received a request, such as an axis movement instruction, that it can't execute
because a servo is off.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?5D
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Valid Only in Manual Mode" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A command that must be received during manual operation has been received while in some
other mode.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?5E
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Can't Receive Due to Load'g" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: The machine has received a command that it can't accept while it is loading or unloading boards.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: This error should not occur under normal conditions.
------------------------------
Code: 12070?60
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Process Abort Due to Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The machine has aborted the process being executed because it has received error notification.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: As this is a sub-message, clear the error that caused the interruption.
------------------------------
Code: 12070?61
Display: "ICM(PMC?,SCU?) Error Code:********"
"Not an SPM type memory card"
Used by: QP203
Cause: The SPM was started with an incompatible memory card.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Use an SPM memory card to start the machine.
------------------------------
Code: 12070?62
Display: "ICM(PMC?,SCU?) Error Code:********"
第 731 页