FUJI错误代码查询.pdf - 第1852页

------------------------------ Code: 2100001A Display: Timer_ev link error Used by: Cause: The timer event could not be linked. Remedy: Reboot MCS. ------------------------------ Code: 2100001B Display: Strings file expa…

100%1 / 5282
Used by:
Cause: The line monitor could not be opened.
Remedy: Check that the pipe exists. If it does not, re-boot MCS.
------------------------------
Code: 21000012
Display: machine port open error (****)
Used by:
Cause: The machine port could not be opened.
Remedy: Change the port.
------------------------------
Code: 21000013
Display: Environment file read error (****)
Used by:
Cause: The environment file could not be read.
Remedy: Check that the environment file exists.
------------------------------
Code: 21000014
Display: Packing pipe open error (****)
Used by:
Cause: The packing pipe could not be opened.
Remedy: Check that the packing pipe exists. If it does not, re-boot MCS.
------------------------------
Code: 21000015
Display: Packing pipe write error (****)
Used by:
Cause: The packing pipe could not write.
Remedy: Check that the packing pipe exists. If it does not, re-boot the system.
------------------------------
Code: 21000016
Display: Error XXXX report from M/C
Used by:
Cause: Error code XXXX was received from the machine.
Remedy: Find error code XXXX in the directory.
------------------------------
Code: 21000017
Display: version change error
Used by:
Cause: The machine version was changed.
Remedy: Reset the MCS.
------------------------------
Code: 21000018
Display: sep_log pipe open error
Used by:
Cause: The pipe could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 21000019
Display: logfile separate error
Used by:
Cause: There was a logfile separate error.
Remedy: Re-execute the function.
第 1851 页
------------------------------
Code: 2100001A
Display: Timer_ev link error
Used by:
Cause: The timer event could not be linked.
Remedy: Reboot MCS.
------------------------------
Code: 2100001B
Display: Strings file expand error (***)
Used by:
Cause: The message file could not be expanded.
Remedy: Reboot MCS. If the problem persists, reinstall the system.
------------------------------
Code: 2100001C
Display: Logfile save error
Used by:
Cause: The log file could not be written to the hard disk.
Remedy: Check how much space remains in the hard disk. Check the disk partitions. If there is not
enough remaining space, delete all unnecessary files and check that the disk is in good condition. If the
error recurs and there is space available, it is possible that the disk is damaged.
------------------------------
Code: 2100001D
Display: Version error machine No. **(****)
Used by:
Cause: The data already in the machine interfered with the data in the version being transmitted to the
machine.
Remedy: Reset-start the machine (machine No.**) and re-boot MCS.
------------------------------
Code: 2100001E
Display: Version check time over
Used by:
Cause: The version being transmitted to the machine could not be checked.
Remedy: Turn off the machine power, re-boot MCS, re-boot the machine and re-transmit the version.
------------------------------
Code: 2100001F
Display:
Used by:
Cause: The production event file could not be read.
Remedy: Reinstall and reboot MCS. If this error recurs, there is the possibility that the file is damaged.
------------------------------
Code: 21001000
Display:
Used by:
Cause: The transmission sub-process could not be carried out due to a system error.
Remedy: Re-install the Host communication software.
------------------------------
Code: 21001041
Display: Illegal function code/command
Used by:
Cause: The start-up command was incorrect.
Remedy: Correct the specified start-up command.
第 1852 页
------------------------------
Code: 21001043
Display: Illegal argument
Used by:
Cause: The start-up parameters are incorrect.
Remedy: Correct the parameters (set the overwrite mode, change the file directory, etc.)
------------------------------
Code: 210010CF
Display: Process Memory full
Used by:
Cause: Sufficient memory area could not be allocated as the work area to carry out conversion of
transmitted data.
Remedy: Check that there is sufficient memory to operate the system. If there isn't, perform a system
reset.
------------------------------
Code: 210010D3
Display: End of file
Used by:
Cause: The end of file (EOF) character was detected while a file was being read.
Remedy: The file format is incorrect. The file has probably been damaged for some reason. Run the
communication function again with a different file. If the error occurs again with the new file.
------------------------------
Code: 210010D6
Display: File not accesible
Used by:
Cause: The file is write protected, so it is not possible to write data to the file or to delete the file.
Remedy: Use the File Services function from the UCI menu to cancel the write protection.
------------------------------
Code: 210010D7
Display: Bad path name
Used by:
Cause: The directory (path) is specified incorrectly.
Remedy: Specify the directory correctly.
------------------------------
Code: 210010D8
Display: File not found
Used by:
Cause: A non-existent file was specified.
Remedy: Check the file name.
------------------------------
Code: 210010DA
Display: File already exists
Used by:
Cause: A Part Data file with the same name already exists, and the current file cannot be loaded.
Remedy: Set the overwrite mode to YES to replace the contents of the existing file, or specify a new file
name.
------------------------------
Code: 210010DD
Display: Module not found
Used by:
Cause: The specified module does not exist, or could not be loaded.
第 1853 页