FUJI错误代码查询.pdf - 第1396页
Used by: Cause: The part boundary could not be found. Remedy: Check the part shape and check that the vision processing system is taking the image correctly. ------------------------------ Code: 1D0F4016 Display: Used by…
Code: 1D0F400A
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part size, and check the image taken by vision processing.
------------------------------
Code: 1D0F400B
Display:
Used by:
Cause: The initial lead could not be found.
Remedy: Check the lead width, part feeding orientation and vision processing system.
------------------------------
Code: 1D0F400C
Display:
Used by:
Cause: The first lead could not be found in each area.
Remedy: Check the lead width, the orientation of the parts as they are fed into the machine and check
that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F400D
Display:
Used by:
Cause: The lead pitch is too wide and/or the lead width is too wide.
Remedy: Check the part.
------------------------------
Code: 1D0F400E
Display:
Used by:
Cause: A missing or broken lead was encountered during vision processing.
Remedy: Check the lead pitch and the orientation of the part.
------------------------------
Code: 1D0F400F
Display:
Used by:
Cause: The lead pitch exceeds the permissible range.
Remedy: Check the shape of the part.
------------------------------
Code: 1D0F4010
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4011
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4012
Display:
第 1395 页
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4016
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0F4019
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0F401B
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0F401C
Display:
Used by:
Cause: The lead could not be found.
Remedy: Check the part size and orientation.
------------------------------
Code: 1D0F401D
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F401F
Display:
Used by:
Cause: There are too many leads.
Remedy: Check the part shape, and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4020
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4021
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
第 1396 页
------------------------------
Code: 1D0F8002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D0F8100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D0F8110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D0F8111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D0F8112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D0F8113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D0F8114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D0F8115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
第 1397 页