FUJI错误代码查询.pdf - 第1920页
Remedy: Check the Part data being used by the program. ------------------------------ Code: 2100682C Display: Dot_sequence in traial_dot space <warning> Used by: Cause: The trial dot sequence is incorrect. Remedy: …
Display: GLgen_Parameter file error
Used by:
Cause: GLgen parameter is incorrect.
Remedy: Check the GLgen parameter file.
------------------------------
Code: 21006824
Display: Memory error
Used by:
Cause: The memory cannot be saved.
Remedy: Re-boot MCS.
------------------------------
Code: 21006825
Display: Memory error
Used by:
Cause: The memory cannot be saved.
Remedy: Re-boot MCS.
------------------------------
Code: 21006826
Display: Input file over
Used by:
Cause: The input file is too long.
Remedy: Check the input file.
------------------------------
Code: 21006827
Display: Total sequence over <max 5000>
Used by:
Cause: There are too many sequences.
Remedy: Check the number of sequences in the program.
------------------------------
Code: 21006828
Display: Total Device over <max 500>
Used by:
Cause: There are too many devices.
Remedy: Check the number of devices in the program.
------------------------------
Code: 21006829
Display: Traial_dot space error
Used by:
Cause: The trial dot area is incorrect.
Remedy: Check the trial dot area.
------------------------------
Code: 2100682A
Display: Part Data reference by Device_data dose not exist.
Used by:
Cause: The Part data referenced by the device data cannot be found.
Remedy: Check the Part data being used by the program.
------------------------------
Code: 2100682B
Display: Part Data reference by Device_data dose not contain GL_gen d
Used by:
Cause: The GL_gen data referenced by the device data cannot be found.
第 1919 页
Remedy: Check the Part data being used by the program.
------------------------------
Code: 2100682C
Display: Dot_sequence in traial_dot space <warning>
Used by:
Cause: The trial dot sequence is incorrect.
Remedy: Check the trial dot sequence.
------------------------------
Code: 21006830
Display: Not use foreground in motive from HOST
Used by:
Cause: HOST cannot start in the foreground.
Remedy: Do a background startup.
------------------------------
Code: 21006831
Display: Not use optimize option in motive from HOST
Used by:
Cause: The optimizer cannot start in HOST startup.
Remedy: Do not use the optimizer in HOST startup.
------------------------------
Code: 21006832
Display: Prod program scale error !! [mm or inch]
Used by:
Cause: The production program uses the wrong system of measurement.
Remedy: Check all the measurements used in all the production programs.
------------------------------
Code: 21006833
Display: os9 fork error !!
Used by:
Cause: The program was incorrectly started up.
Remedy: Re-boot MCS.
------------------------------
Code: 21006840
Display: Normal data file open error !!
Used by:
Cause: Unable to open a temporary file.
Remedy: Check the amount of available /R0 memory.
------------------------------
Code: 21006841
Display: Line data file open error !!
Used by:
Cause:
Remedy: Unable to open a temporary file.
------------------------------
Code: 21006842
Display: Off line data file open error !!
Used by:
Cause:
Remedy: Unable to open a temporary file.
------------------------------
Code: 21006843
第 1920 页
Display: Line switch input error !!
Used by:
Cause: The line switch input is incorrect.
Remedy: Check the line switch input.
------------------------------
Code: 21006844
Display: File already exists !!
Used by:
Cause: The file already exists.
Remedy: Check the filename.
------------------------------
Code: 21007000
Display: Illegal parameter
Used by:
Cause: The startup parameter was illegal.
Remedy: If doing a direct startup, check the input parameters.
------------------------------
Code: 21007001
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007002
Display: Read pipe open error
Used by:
Cause: Unable to open the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007003
Display: Write pipe open error
Used by:
Cause: Unable to open the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007004
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007005
Display: Ls pipe create error
Used by:
Cause: Unable to create the pipe.
Remedy: Wait a while and re-execute the function.
------------------------------
Code: 21007006
Display: Work directory create error
Used by:
Cause: Unable to create a work directory.
第 1921 页