FUJI错误代码查询.pdf - 第1930页
Remedy: Check the file. ------------------------------ Code: 21007403 Display: Message file read error Used by: Cause: Unable to read the message file. Remedy: Re-install the software. ------------------------------ Code…
Display: Make not apply sequence
Used by:
Cause: Application sequences were not created.
Remedy: This message occurs whenever there is a program without application sequences.
------------------------------
Code: 21007122
Display: Input & output filename duplecate
Used by:
Cause: The name of the input file and the output file are the same.
Remedy: Change the filenames.
------------------------------
Code: 21007123
Display: Output file already exist
Used by:
Cause: The output file already exists.
Remedy: Change the filename or overwrite the old file.
------------------------------
Code: 21007124
Display: New prodction file has no sequence data
Used by:
Cause: The new production program has no sequence data.
Remedy: Check the program sequence data.
------------------------------
Code: 21007125
Display: Input program file name is too long
Used by:
Cause: The input filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007126
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007400
Display: Illegal Parameter option
Used by:
Cause: The specified option is illegal.
Remedy: If doing a direct start-up, check the start-up option.
------------------------------
Code: 21007401
Display: Illegal parameter
Used by:
Cause: The startup parameter is illegal.
Remedy: If doing a direct start-up, check the start-up parameters.
------------------------------
Code: 21007402
Display: Pt file read error
Used by:
Cause: The permanent set table cannot be read.
第 1929 页
Remedy: Check the file.
------------------------------
Code: 21007403
Display: Message file read error
Used by:
Cause: Unable to read the message file.
Remedy: Re-install the software.
------------------------------
Code: 21007404
Display: Read pipe create error
Used by:
Cause: Unable to open the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007405
Display: Write pipe create error
Used by:
Cause: Unable to open the pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 21007406
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot MCS.
------------------------------
Code: 21007407
Display: MTT file get error
Used by:
Cause: Unable to read the machine type table.
Remedy: Re-install the software.
------------------------------
Code: 21007408
Display: MTT file not found
Used by:
Cause: MTT file not found.
Remedy: Re-install the software.
------------------------------
Code: 21007409
Display: MTT file open error
Used by:
Cause: Unable to open the machine type table.
Remedy: Re-install the system.
------------------------------
Code: 2100740A
Display: Memory alocation error
Used by:
Cause: Unable to allocate memory.
Remedy: Re-boot MCS.
------------------------------
Code: 2100740B
第 1930 页
Display: File offset get error
Used by:
Cause: The file offset cannot be obtained.
Remedy: Re-install the software.
------------------------------
Code: 2100740C
Display: MTT file seek error
Used by:
Cause: Unable to seek the file.
Remedy: Re-install the software.
------------------------------
Code: 2100740D
Display: Production file read err
Used by:
Cause: Unable to read the production program.
Remedy: Check the filename and the file.
------------------------------
Code: 2100740E
Display: Part data read error
Used by:
Cause: Unable to read the Part data.
Remedy: Check the filename and the file.
------------------------------
Code: 2100740F
Display: Cartridge name create err
Used by:
Cause: Unable to create feeder names.
Remedy: Check that the information in Part data's Package_and_appearance_data is entered correctly.
------------------------------
Code: 21007410
Display: Queue data create error
Used by:
Cause: Unable to save the memory.
Remedy: Re-boot MCS.
------------------------------
Code: 21007411
Display: Dequeing error
Used by:
Cause: Unable to de-queue memory.
Remedy: Re-boot MCS.
------------------------------
Code: 21007412
Display: Queueing error
Used by:
Cause: Unable to queue data.
Remedy: Re-boot MCS.
------------------------------
Code: 21007413
Display: PST file not found
Used by:
Cause: The PST file was not found.
第 1931 页